Ok, finally we have pictures of everything from our first test car for the complete kit. These pieces were just bolt on, no modifications done for fitment were necesssary for the body kit. Everything is 100% made in the USA. Front bumper is the zenon front that we have had out for a little while. Hood is the EVO VI style hood that goes with either the zenon or evo3 kits. Grill is the grill the customer had on the car already. The side skirts are the zenon/evo3 side skirts. Similar in design to the old apex side skirts, but about an inch longer for better fitment, also, a whole lip has been added so it tucks under the door for bettter support. As some who have the old apex kit saw, the skirts didnt quite reach the car...leaving a gap. The rear bumper is the bumper for the zenon/evo 3 kits. Depending on what exhaust you have, you may have to slightly change the hanger position of the exhaust so that it fits through the hole. For example this test car had a custom exhaust on it that needed to be changed for future fitment.

 

Lets see how it fits with the tails on it.....

 

soon hopefully. We couldnt put the rear complete on because of that exhaust....

 

That bumper looks kinda boxy and drag-***-ady. Maybe it will look a bit more agressive with the tails on.

 

bumper, hood and sidskirts look sweet, but that bumper... looks freakin huge! Maybe its just cause the tail lights are missing???

 

remember, the bumper is like a few inches away from the car...if you look closely to the right of the exhaust hole, you will see the customers exhaust. Since it was there, we couldnt put on the bumper completely. thus it looks huge since its sticking way out from the car. We just lined it up there to give you an idea of how it WILL look, once it gets installed.

 

i might be interested in the front bumper, but i wish vendors would show there product painted and completed first. i dont care what it looks like out the box i just want to see the final project. just my $0.02

Link

 

Well, there are a few people out there with the front bumper painted who have posted pictures.....as far as the rest, those are fresh out of the mold. That customer will have them painted in the next couple weeks.

 

How much will this kit cost? Will it be cheap since it is made in the USA? How do you stop the side from showing in the hole in the side skirt? Can you make a rear bumper w/o those lines? Does the rear bumper stick out like the stock bumper? Which came first, the chiken or the egg?

 

Kit prices are on the website. We are trying to keep prices down, even though its a lot more expensive to make kits here in the USA than over seas. For the side, we recommend a grill...or just keeping it shut. I beleve the hole in the sides is there, but you have the option of cutting it out completely or not. What lines are you referring to of the rar bumper? Rear bumper sticks out just enough to make sure it clears the rear reinforcement bumper.....Chicken came first.

 

I'm loving the look of the kit so far, but as Joe pointed out, what's up with the sideskirts? You mentioned that you don't have to cut that section out; can we see pics without that section cut out?

 

The lines that I was talking about are the ones by the bottom. Do you have one where it looks like a stock bumper? No designs or anything

 

is there any kit that completely removes that grill??any news on that..by the way this kit is really neat...

 

yea samething charlie said

 

What kind of material is this kit made off?