Stock Exterior/Interior Bulb Replacement
Stock Exterior/Interior Bulb Replacements
Headlight Bulbs - 9007
Front/Rear Turn Signals - 1156
Parking Light - 168/194NA
Side Turn Signal - 168/194NA
Rear License Plate - 194NA
Back-up Light - 921
Interior AC Control, Cigarette Lighter, Ashtray, Lights - 74
Trunk Light - 3022
Dome Light - 3175
Brake Lights - 7443
Stock CDPlayer = Dim Control - ? *!NOT! 74*

Am I missing out anything?
Could somebody add the wattage/voltage too...?
Front/Rear Turn Signals - 1156
Parking Light - 168/194NA
Side Turn Signal - 168/194NA
Rear License Plate - 194NA
Back-up Light - 921
Interior AC Control, Cigarette Lighter, Ashtray, Lights - 74
Trunk Light - 3022
Dome Light - 3175
Brake Lights - 7443
Stock CDPlayer = Dim Control - ? *!NOT! 74*
Am I missing out anything?
Could somebody add the wattage/voltage too...?
Last edited by drummerjun; Oct 7, 2003 at 12:37 PM.
does that mean these woulT1.5 Instrument LED bulb
1-LED Instrument Cluster and Gauge illumination bulb. #74 LED bulb installed in twist-lock socket base Available with White,Blue,Green,Red and Amber Wide Angle LED d fit in the gauge cluster (speedo)??
but since its LED it wont shine wide enough to make the whole thing blue right.... just thought of that.. ok opinipns??? is that right??
1-LED Instrument Cluster and Gauge illumination bulb. #74 LED bulb installed in twist-lock socket base Available with White,Blue,Green,Red and Amber Wide Angle LED d fit in the gauge cluster (speedo)??
but since its LED it wont shine wide enough to make the whole thing blue right.... just thought of that.. ok opinipns??? is that right??
those are right #s
1157 will not work because its a double contact bulb, we only use 1 contact point..
#74 bulb is not a twist-lock socket, its a wedge.. and from what i've heard, the speedo gauge cluster bulb is larger than #74, but I havent taken mine apart to check it out, if you find out the cluster # post it!
EDIT::: note on the #74 bulb, the bulb sits inside a twist-socket, the bulb itself is a wedge that sits inside teh socket... some companies offer teh bulb w/socket and others only teh bulb... just wanted to clear that up
1157 will not work because its a double contact bulb, we only use 1 contact point..
#74 bulb is not a twist-lock socket, its a wedge.. and from what i've heard, the speedo gauge cluster bulb is larger than #74, but I havent taken mine apart to check it out, if you find out the cluster # post it!
EDIT::: note on the #74 bulb, the bulb sits inside a twist-socket, the bulb itself is a wedge that sits inside teh socket... some companies offer teh bulb w/socket and others only teh bulb... just wanted to clear that up
Last edited by psionic98; Oct 1, 2003 at 07:55 AM.
Originally posted by psionic98
#74 bulb is not a twist-lock socket, its a wedge.. and from what i've heard, the speedo gauge cluster bulb is larger than #74, but I havent taken mine apart to check it out, if you find out the cluster # post it!
#74 bulb is not a twist-lock socket, its a wedge.. and from what i've heard, the speedo gauge cluster bulb is larger than #74, but I havent taken mine apart to check it out, if you find out the cluster # post it!
Sorry, I wasn't very clear.
If you have ever taken off your A/C controls to change the lights behind it from the condom covered #74 wedge bulbs you will know what I mean. If you take that apart, the socket that the bulbs are pushed into are twist-locked into the circuit board so they make contact with the power for the bulb. if you pull the circuit board down you can reach behind and unlock the grey bulb holder... that is what I meant by saying it has a twist-lock socket.... hope that clears it up some
basically, grey part bulb is held in by = socket, and its twist-locked into position!
If you have ever taken off your A/C controls to change the lights behind it from the condom covered #74 wedge bulbs you will know what I mean. If you take that apart, the socket that the bulbs are pushed into are twist-locked into the circuit board so they make contact with the power for the bulb. if you pull the circuit board down you can reach behind and unlock the grey bulb holder... that is what I meant by saying it has a twist-lock socket.... hope that clears it up some
basically, grey part bulb is held in by = socket, and its twist-locked into position!
wow joe, i was just about to look that up the other day but was too lazy to do it.. and soon enough u post a thread with all the info i needed to know.. hehe good job! sticky this!!
Trending Topics
Standard incandescent #74 @ $0.99 each -> Don't buy LED's here!Way too expensive
Red #74 LED's @ $1.19 each
Red #74 LED's @ $1.19 each
with the parking light, are those two different bulb sizes or just one particular size with a damn slash between the two numbers?
hehe sorry for the ignorance, but where would i be able to order these anyway?
hehe sorry for the ignorance, but where would i be able to order these anyway?
if anyone orders those LEDS from that site, can you please post how they are and whether they fit correctly, i have recently taken my dash apart and those seem to look a little different to me or maybe its the plastic bottom thats throwing me off....
Originally posted by ciaxtrinity1
how many #74 bulbs do we have in the ac unit? is it 3 of them?
how many #74 bulbs do we have in the ac unit? is it 3 of them?
1 for cigarette lighter
1 for ashtray
8 for CD Player (NOT #74)
1 for dim control (NOT #74)
Last edited by drummerjun; Nov 16, 2004 at 12:37 AM.
sorry if off topic...so if i take the radio apart i can put 8 red led in them and it will be red when i turn it on? how hard is this to do? askin cuz i wanna try since my car is basically stock again. might as well mess wit something
How to change stock radio backlight color
BTW, the 3175 Dome Lights can be replaced with 3022 (same as trunk light) right?
I've seen 3022 with 31mm and 39mm, which one fits will fit for the trunk/dome lights?
BTW, the 3175 Dome Lights can be replaced with 3022 (same as trunk light) right?
I've seen 3022 with 31mm and 39mm, which one fits will fit for the trunk/dome lights?
Last edited by drummerjun; Oct 2, 2003 at 04:08 PM.
Now I myself got a question to ask..
On this LED site, they sell several different types of 194/168 type LED bulbs.
There's WLED-W4 White LED bulb with 4 LED's and
T13-W6 White LED bulb with 6 LED's which measures 1-1/8" long and 1/2" diameter.
These 6-LED's are bigger and longer than the regular 4 LED's, but they still fit in the stock socket, but my question is, will they fit in our stock headlight slots?
PS. and somebody please answer my question above...thanks
On this LED site, they sell several different types of 194/168 type LED bulbs.
There's WLED-W4 White LED bulb with 4 LED's and
T13-W6 White LED bulb with 6 LED's which measures 1-1/8" long and 1/2" diameter.
These 6-LED's are bigger and longer than the regular 4 LED's, but they still fit in the stock socket, but my question is, will they fit in our stock headlight slots?
PS. and somebody please answer my question above...thanks
Last edited by drummerjun; Oct 2, 2003 at 04:08 PM.
Originally posted by drummerjun
How to change stock radio backlight color
BTW, the 3175 Dome Lights can be replaced with 3022 (same as trunk light) right?
I've seen 3022 with 31mm and 39mm, which one fits will fit for the trunk/dome lights?
How to change stock radio backlight color
BTW, the 3175 Dome Lights can be replaced with 3022 (same as trunk light) right?
I've seen 3022 with 31mm and 39mm, which one fits will fit for the trunk/dome lights?
Originally posted by drummerjun
Now I myself got a question to ask..
On this LED site, they sell several different types of 194/168 type LED bulbs.
There's WLED-W4 White LED bulb with 4 LED's and
T13-W6 White LED bulb with 6 LED's which measures 1-1/8" long and 1/2" diameter.
These 6-LED's are bigger and longer than the regular 4 LED's, but they still fit in the stock socket, but my question is, will they fit in our stock headlight slots?
PS. and somebody please answer my question above...thanks
Now I myself got a question to ask..
On this LED site, they sell several different types of 194/168 type LED bulbs.
There's WLED-W4 White LED bulb with 4 LED's and
T13-W6 White LED bulb with 6 LED's which measures 1-1/8" long and 1/2" diameter.
These 6-LED's are bigger and longer than the regular 4 LED's, but they still fit in the stock socket, but my question is, will they fit in our stock headlight slots?
PS. and somebody please answer my question above...thanks
damn i bought the red #74 led's and they arent bright at all. the regular bulbs that i replaced them with are brighter. damn i thought led's were suppose to be bright as hell..oh well guess ill order the regular red 74 and see how they do.
its not as much as there not brighter but they shoot the light straight ahead instead of a wide beam. so the plastic that disperses the light throught the buttons doesnt light up as much
ok, so I bought a couple 74's..
and turns out....the STOCK CD PLAYER DUN USE 74 BULBS!
they are much much shorter and smaller than 74's and I've no idea what they are....
and turns out....the STOCK CD PLAYER DUN USE 74 BULBS!
they are much much shorter and smaller than 74's and I've no idea what they are....



