Notices
Lancer Tranny/Drivetrain Tech Anything drivetrain related can be discussed here.

Need clutch help....

Thread Tools
 
Search this Thread
 
Old Jun 29, 2010 | 02:43 PM
  #1  
milruner's Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Jul 2007
Posts: 301
Likes: 0
From: Central cali
Need clutch help....

I remember awhile ago someone had all the parts that's are needed, and part numbers to get rid of the slave cylinder, from the 02 lancer OZ, and put the TOB, clutch fork, and all the parts that are like used on the 03-04 lancer 5 speed. If someone can help me out that be very thankful.
MIKE
Reply
Old Jun 29, 2010 | 04:16 PM
  #2  
milruner's Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Jul 2007
Posts: 301
Likes: 0
From: Central cali
Bump.
MIKE
Reply
Old Jun 29, 2010 | 04:24 PM
  #3  
JRR's Avatar
JRR
Evolved Member
iTrader: (19)
 
Joined: May 2007
Posts: 1,620
Likes: 0
From: South Central WI
the bell housing inside is also different as i found out when i put an 04 trans in my 03. the 02-03 slave will not bolt up to an 04-06 bell housing.

the fork is #MD747524


just an fyi
josh
Reply
Old Jun 29, 2010 | 06:08 PM
  #4  
senate6268's Avatar
Evolved Member
iTrader: (20)
 
Joined: Jun 2003
Posts: 1,987
Likes: 19
From: Buffalo Grove, IL
Like JRR said, the bellhousing is different as well. So for you to swap over, here's what you'd need:

MD747413 - clutch release boot
MD747524 - fork
MD719602 - fulcrum
MD747279 - retainer
MF140203 - bolt (x4)
MD749998 - throwout bearing
MD748038 - clutch line
MR980563 - slave cylinder
MF241255 - bolt (x2)
MD706185 - bearing retaining clip
2315A012 - bellhousing
Reply
Old Jun 29, 2010 | 06:18 PM
  #5  
milruner's Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Jul 2007
Posts: 301
Likes: 0
From: Central cali
Does anyone know about what the prices are for everything?
Reply
Old Jun 29, 2010 | 06:36 PM
  #6  
JRR's Avatar
JRR
Evolved Member
iTrader: (19)
 
Joined: May 2007
Posts: 1,620
Likes: 0
From: South Central WI
Originally Posted by senate6268
Like JRR said, the bellhousing is different as well. So for you to swap over, here's what you'd need:

MD747413 - clutch release boot
MD747524 - fork
MD719602 - fulcrum
MD747279 - retainer
MF140203 - bolt (x4)
MD749998 - throwout bearing
MD748038 - clutch line
MR980563 - slave cylinder
MF241255 - bolt (x2)
MD706185 - bearing retaining clip
2315A012 - bellhousing
Originally Posted by milruner
Does anyone know about what the prices are for everything?

here you go

josh
Reply
Old Jun 29, 2010 | 08:16 PM
  #7  
senate6268's Avatar
Evolved Member
iTrader: (20)
 
Joined: Jun 2003
Posts: 1,987
Likes: 19
From: Buffalo Grove, IL
Originally Posted by JRR
The cart is session based. Here's a breakdown of the costs:
Attached Thumbnails Need clutch help....-clutch.parts.png  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vagelisix
Evo Engine / Turbo / Drivetrain
8
Sep 23, 2013 07:06 AM
khasal
Midwest Region
7
May 5, 2010 02:42 PM
Drift4
Lancer Troubleshooting
5
Jul 7, 2007 08:57 PM
stockredevo
Evo How To Requests / Questions / Tips
10
Mar 17, 2007 11:40 AM




All times are GMT -7. The time now is 08:12 AM.