Lancer Customers - Parts Blowout for YOU!!!
Jun 24, 2003, 09:52 AM
#1
Lancer Customers - Parts Blowout for YOU!!!
Lancer customers...Vivid Racing would like to offer you this awesome deal on parts to enhance your performance and get your car moving ahead of others.
RMR Axel Back system - The RMR High Flow Exhaust System adds mid to high-end horsepower. It's made from 302 stainless steel and it bolts up to the factory flange and uses all the stock hangers.
$309
RMR Intake system - The RMR intake uses basic engine theory; bring in the coolest air possible, as fast as possible. We use a special high efficiency reusable filter to provide the maximum in filtration and performance, and custom heat shield to keep out hot engine heated air. Our system incorporates the factory air scoop that sits behind the front grill. The scoop guides the forced cold air directly from the outside to the filter.
$139
RMR Strut Bar- The RMR Strut Tower Brace supports the upper strut tower mounts to prevent chassis flex during cornering. It reduces wheel deflection and improves the overall handling of the car. $149
RMR Flat Panel Filter- The RMR High Flow Panel Filter is a great option if you do not want the full intake system. This High Flow reusable filter improves throttle response and increases power by as much as 3 hp. It has also been know to increase gas mileage. This piece is easy to install and easy to maintain.
$39
Tein S Tech Springs - STech Springs for your lancer offer a great look and ride to your car. Enhance your handling with these springs that lower your car 1.4 inches in the front and 1.1 inches in the rear. The Springs have a good spring rate that is progressive of 168 lbs/in front and 129 lbs/in rear.
$189
Injen IS Intake - For the enthusiast who is looking for a polished, show quality system we offer the traditional "under the hood" intake. Each intake is engineered for both aesthetics and peak performance and then tested over and over again on a dynomometer for maximum horsepower gain and torque. All components are manufactured in the USA and each kit comes complete with all necessary hardware and vibra-mounts. Fits 2.0L Lancer motors. Available in Polished.
$199
To order call us and we will take care of you. If you order more then $500, receive DISCOUNTED SHIPPING.
www.vividracing.com
sales@vividracing.com
4809663040
RMR Axel Back system - The RMR High Flow Exhaust System adds mid to high-end horsepower. It's made from 302 stainless steel and it bolts up to the factory flange and uses all the stock hangers.
$309
RMR Intake system - The RMR intake uses basic engine theory; bring in the coolest air possible, as fast as possible. We use a special high efficiency reusable filter to provide the maximum in filtration and performance, and custom heat shield to keep out hot engine heated air. Our system incorporates the factory air scoop that sits behind the front grill. The scoop guides the forced cold air directly from the outside to the filter.
$139
RMR Strut Bar- The RMR Strut Tower Brace supports the upper strut tower mounts to prevent chassis flex during cornering. It reduces wheel deflection and improves the overall handling of the car. $149
RMR Flat Panel Filter- The RMR High Flow Panel Filter is a great option if you do not want the full intake system. This High Flow reusable filter improves throttle response and increases power by as much as 3 hp. It has also been know to increase gas mileage. This piece is easy to install and easy to maintain.
$39
Tein S Tech Springs - STech Springs for your lancer offer a great look and ride to your car. Enhance your handling with these springs that lower your car 1.4 inches in the front and 1.1 inches in the rear. The Springs have a good spring rate that is progressive of 168 lbs/in front and 129 lbs/in rear.
$189
Injen IS Intake - For the enthusiast who is looking for a polished, show quality system we offer the traditional "under the hood" intake. Each intake is engineered for both aesthetics and peak performance and then tested over and over again on a dynomometer for maximum horsepower gain and torque. All components are manufactured in the USA and each kit comes complete with all necessary hardware and vibra-mounts. Fits 2.0L Lancer motors. Available in Polished.
$199
To order call us and we will take care of you. If you order more then $500, receive DISCOUNTED SHIPPING.
www.vividracing.com
sales@vividracing.com
4809663040
Last edited by Vivid Racing; Jun 24, 2003 at 10:23 AM.
Jun 24, 2003, 10:38 AM
#6
Evolved Member
iTrader: (6)
Join Date: Apr 2002
Location: NY
Posts: 708
Likes: 0
Received 0 Likes
on
0 Posts
intrested in strut bar...please PM or email me at Zoolanderlphie@hotmail.com
how much to ship to 11561
how much to ship to 11561
Trending Topics
Jun 24, 2003, 10:48 AM
#8
Account Disabled
iTrader: (1)
Join Date: Jun 2003
Location: Toronto, Canada
Posts: 699
Likes: 0
Received 0 Likes
on
0 Posts
You should create staged upgrades. I bet that would get you alot of business, especially if the staged upgrades came with options.....i.e. Staged Upgrade 1: Progressive Springs, Injen Cold Air, RMR Axel Back = $XXXX and then have Eibachs, AEM and GReddy as the options (basically add on the difference).
Jun 24, 2003, 05:17 PM
#12
Evolving Member
iTrader: (2)
Join Date: Aug 2002
Location: Pa
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
does the injen intake fit on an automatic lancer if so how much shipped to 19525. Also can u get other injen intakes? Caus ei really want a short ram in red 
let me know!!
john
let me know!!john
