Nurburgring All Time Production Car Lap Records
#31
This is taking "Take Your Corvette to Work" Day truly seriously.
General Motors said that development engineer Jim Mero posted a lap of 7 minutes, 26.4 seconds around Germany's famed Nürburgring in a production-spec Corvette ZR1. The ZR1 is powered by a supercharged 6.2-liter V8 rated at 638 hp.
General Motors said that development engineer Jim Mero posted a lap of 7 minutes, 26.4 seconds around Germany's famed Nürburgring in a production-spec Corvette ZR1. The ZR1 is powered by a supercharged 6.2-liter V8 rated at 638 hp.
#35
Apparently, this wasn't a prototype: http://www.autoweek.com/apps/pbcs.dl...760145638/1065
Last edited by VincentX; Jul 11, 2008 at 10:22 AM.
#36
By: Tadge J. Juechter
Corvette Chief Engineer
I know many people have been very interested in how fast the ZR1 would be at the Ring
Most car enthusiasts are quite familiar with the Nürburgring. Built in the 1920s near Cologne, Germany, the Ring is considered to be the toughest and most challenging race track in the world.
Over the last two weeks, we have been doing our final tuning and testing there before we start ZR1 production cars. This morning (Friday June 27), General Motors development engineer Jim Mero drove the Corvette ZR1 around the Nürburgring in a time of 7:26.4.
Jim commented after the lap that conditions were good except for a strong headwind down the main straight and that the lap was solid, but he felt there were a few places he could have gone faster.
The car was bone stock with the exception of the communications and safety equipment. The tires were production Michelin Pilot Sport 2s. These tires have been developed specifically for the ZR1 and will have impressive wet traction and wear (tread wear rating = 220), in addition to excellent dry road holding. Chassis alignment and vehicle height were set to factory specs. Likewise, the engine calibrations were absolutely stock, emissions compliant and the car ran on pump (not racing) fuel. The vehicle was exactly like the cars that will be built in Bowling Green, Kentucky and sold around the world later this summer.
Despite posting one of the fastest times ever run by a production car, Nürburgring lap times were not an over-riding priority in the development of the ZR1. The truth is, if the only priority was speed at the ring, the car would not be very pleasant to drive on American roads. The ZR1 is an incredibly capable track machine, but unlike most ultra-high performance cars, it is very easy to live with on a daily basis.
The timed lap was run with a rolling start, a departure from our previous practice of standing starts. This is more aligned with current industry practice. The lap was electronically timed and confirmed with two hand-held stopwatches. An in-car video will be posted when the engineering team returns from Germany. Look for it the week of July 7!
Corvette Chief Engineer
I know many people have been very interested in how fast the ZR1 would be at the Ring
Most car enthusiasts are quite familiar with the Nürburgring. Built in the 1920s near Cologne, Germany, the Ring is considered to be the toughest and most challenging race track in the world.
Over the last two weeks, we have been doing our final tuning and testing there before we start ZR1 production cars. This morning (Friday June 27), General Motors development engineer Jim Mero drove the Corvette ZR1 around the Nürburgring in a time of 7:26.4.
Jim commented after the lap that conditions were good except for a strong headwind down the main straight and that the lap was solid, but he felt there were a few places he could have gone faster.
The car was bone stock with the exception of the communications and safety equipment. The tires were production Michelin Pilot Sport 2s. These tires have been developed specifically for the ZR1 and will have impressive wet traction and wear (tread wear rating = 220), in addition to excellent dry road holding. Chassis alignment and vehicle height were set to factory specs. Likewise, the engine calibrations were absolutely stock, emissions compliant and the car ran on pump (not racing) fuel. The vehicle was exactly like the cars that will be built in Bowling Green, Kentucky and sold around the world later this summer.
Despite posting one of the fastest times ever run by a production car, Nürburgring lap times were not an over-riding priority in the development of the ZR1. The truth is, if the only priority was speed at the ring, the car would not be very pleasant to drive on American roads. The ZR1 is an incredibly capable track machine, but unlike most ultra-high performance cars, it is very easy to live with on a daily basis.
The timed lap was run with a rolling start, a departure from our previous practice of standing starts. This is more aligned with current industry practice. The lap was electronically timed and confirmed with two hand-held stopwatches. An in-car video will be posted when the engineering team returns from Germany. Look for it the week of July 7!
#39
Evolved Member
iTrader: (23)
Join Date: Dec 2003
Location: Boulder, CO
Posts: 1,203
Likes: 0
Received 0 Likes
on
0 Posts
Bone stock -- as are the ringers that manufacturers provide car magazines for testing... Ford GT comes to mind.
The ring has too many variables; it is almost like comparing dynos.
The ring has too many variables; it is almost like comparing dynos.
#42
#44
Evolving Member
iTrader: (1)
Join Date: Sep 2007
Location: AZ
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
#45
I'm sure that if GM wanted to make a race version of the Cobalt SS, it would easily run faster than 8:17.