Description:

I have a decent amount of parts i would like to sell to make up for purchasing a new Exedy twin disc so, here goes.

Prices do NOT include shipping or paypal fees.




The 10.5 Hotside needs work, it had a broken bolt on the 02 housing side that was partially removed, but not fully extracted so it still needs to be fixed. One stud on the same side (02 housing side) should be replaced since the threads are messed up. The hotside also has a crack on the inside, shown in the last photo.

Evo 9 turbo hotside - $50 (please read above)
(up and down shaft play, hard any in and out play)
(1) evo x BOV - $75
LICP that is banged up but functional. comes as shown with coupler $30
stock 02 housing - $15

STM air intake for stock MAF setup (also has AN fitting welded for catch can setup) with couplers for 84mm inlet. SOLD
evo 8 turbo (9.8T) good shape with coolant lines, wastegate actuator - SOLD
71HTA - SOLD
(1) evo 9 Blow off Valve SOLD
MAF w/ Injen adaptor SOLD
MAF w/ K&N filter SOLD
Evo 9 turbo cold side only- SOLD