Description:

All Prices are shipped and OBO. Send reasonable offers over.

ACT Street/Strip Clutch and Street Light Flywheel - $750
-Used for about 3k miles and has 1 track day on it. Track day was a road course, not drag racing.

ARP Head Studs- $75-Used for about 3k miles. Upgrading to L19 studs

ETS Turbo Intake Tube - $80
-Bought this from another member and never used it

ID 1050cc Injectors - SOLD
-Used for 1.5k miles with E85 Ethanol
-Just had them cleaned, flow tested, and leak tested at Wild Performance
-Check them out on Instagram. There's a picture of these injectors being through the process

STM Brushed Aluminum Upper Intercooler Piping- SOLD
-Used for 2k miles
-Little rub marks from an lines for catch can

AMS 3.5" Intercooler- SOLD
-Unknown Mileage. It was on the car when I purchased it. Good Condition, just upgraded to a new one.

Tomei BOV - SOLD
-Used for 1.5k miles
-Worked great at 26psi
-Upgrading to Tial

AMS Lower IC piping - Sold
-Unknown Mileage. It was on the car when I purchased it. Good Condition, just upgraded to newer piping

Blouch 1.0XT Journal Bearing Turbo- Sold
-Used for about 1.5K miles and 1 track day. Ran at 26psi and put down 390hp with other supporting mods.
-Upgrading to a larger turbo
-Bolt on. Absolutely great turbo. Like new.

Custom Catch Can with -10an Lines- Sold
-Used for about 1.5K miles and 1 track day. Like New

HKS HiPower Exhaust - Sold
- Used for about 2k miles. Still in great condition
-Welded on test pipe in place of Cat
-Prefer local pick up and will discount if buyer wants to pick it up

Koyo HH-Series 48mm Aluminum Radiator - Sold
-Needs Evo 4/5/6 rad piping to work
-Great upper hose location that is away from exhaust mani and turbo
-Used for about 1.5K miles.
-Comes with Koyo rad cap

STM Stainless Exhaust Manifold Heat Shield - Sold
-Used for about 1k miles
-Other than patina from heat, in great condition
-Comes with stainless hardware

STM 3.5" Titanium SD Intake Burned Blue - Sold
-This one hurts. It was a birthday gift that I could not use
-Installed it to see what it looked like and took it back off
-I need a 4" intake so this has to go
-Still brand new