So I swapped back to street pads and installed my new Cobb exhaust tonight with the help of a couple friends. I couldn't get a wrench/ratchet/anything on the bolt on the passenger side of the downpipe so the nut from the bottom isn't on there very tight. Since I'm swapping back to stock turbo soon I'm not gonna worry about the leak much, sure sounds cool. It's like all the cool turbo noises from a cutout but overall the exhaust is pretty quiet.

Anyone else do anything exciting lately?

 

What is CBRD you guys are talking about and how far is the ride? I might be interested i don't know what time you guys are thinking i have to work for a while on Sat. thanks to some guy getting a DUI on the boat....

 

It is a shop in PA.

 

They are doing a dyno day up there, its like 5 or 6 hours

 

6 with no traffic. its a helluva drive

 

Ok so I went to CBRD and checked out the shop, all I can say is holy **** that place is clean and well organized!!!! I saw some big numbers on there Mustang Dyno from stock appearing turbo's (FP Green, Red, and Chad's BBK lite) also saw some pretty nice numbers from some non-stock appearing turbos (GT35R's, HTA35R's and some other stuff) High HP for the non-stock appearing was like 481 and high HP for the stock appearing was 427.9 from Kreionic (Charlie). That stuff spools super fast and makes incredible power! It took us about 4.5 hours to get there even with sitting in traffic around DC for about 15-20 minutes. If you get a chance or are ever in that area I highly recommend you stop by and say hi and check the place out.

Josh

 

BTW if you are looking for a place for a tune that is a little closer and they really know what they are doing, go to DTM and check out Nick's shop and the guys up there will take great care of you. Even if someone else has jacked your **** up. BTW I still have a good bit of these Snap-On spin style "speeders" left in anyone wants one or some. both 1/4 and 3/8 drive.

Josh

 

Just got back today..

 

Man whats up peoples? whos going to the sumospeed show at pungo?

 

Not to make them sound bad but, I went up there and they said that my motor had serious issues. Which i know for sure it doesn't. But for that "reason" they didnt get any numbers. They did two pulls and charged me 150 bucks for it. They said that my valves were all messed up and a bunch of other crap too. So i went to all aspects and the guy there keenan said that he was sure there wasnt anything wrong with my motor. Im waiting to get an EMS before i get it dyno'd again though.

 

DTM def knows there stuff. As for who told you that. It had to be someone other then _____ because he wouldnt put out false info.

And All aspecs knows there stuff as well. But DTM is an EVO shop. So...?

 

I know it was the owner i was talking to and he was telling me all the problems that i apparently have with my car. But i havent had any signs of the problems that he was thinking i was having.

 

Has this thread finally die?

 

this area dies off come winter. thats prolly why. was like this when i got down here in jan.

 

winter sucks