Anybody in the 757 area willing to help me put my car back to stock? I have still have most of the stock stuff for my car. I didn't want to sell my car, but I am most likely goign to sell it sooner or later so I want to start putting everything back to stock. Please shoot me a pm or write a message on this thread, thanks! By the way I can give ya discounts on the parts I have if ya help me or give ya a little bit of money for the help ya provide me.



Frank

 

Where u @ in 757? I have not done anywork on the EVO but have some buddies that r mechanically inclined and work on there cars...RSX's and Hondas. I have a buddy that has done some stuff to his EVO8...e/i/mbc/afc... I am in VB. Holla!

 

what mods do you have to your car? I might be interested in helping

 

https://www.evolutionm.net/forums/sh...d.php?t=179885

 

ya i can help ya with some of it; but might want to give James a call for the fuel pump, I havnt installed, or watched someone install a fuel pump yet on an evo.

 

ok cool, that sounds great 8- ) I will give James a call tomorrow or so and see if he could help me out as well. As for the pump, I have to leave it in unless I get the ecu flashed back to stock settings.

 

If I were to get an Evo IX, which model would you guys consider me getting? I was kind of leaning towards the IX RS model because I rarely drive my evo now and mainly care about the performance aspects of the car. Anybody here have an IX RS and is there a big different besides abs, having no wing, and no ac, and no power windows or is it worth the extra money to get the gs-r model?

 

ok guys... I have decided to keep my evo 8- ) and I am really happy with the decision. The thing is, I test drove an IX RS and did not see a major improvement that is noticeable. I mean there is a 15hp or so diff with mods but yea, with the work already done on my car I don't want to take it all back off and sell the car and buy new stuff for the IX.... So I have decided to keep it... By the way, since I am going to keep the car, can anybody here help me install some camshafts and my intercooler inlet pipe which I never installed yet from my helix ic piping upgrade. Also, my damn downpipe is rattlin like crazy, I needa do somethin about it touchin the transfer case or whatever its touchin... If anybody can help me with my car on this I will greatly appreciate it! I think I've made a good decision by keeping it 8- )

 

well first find out what the downpipe is actually rattling on? If it is one or both of your cross members just go to a hardware store and buy some washers that can fit on the bolts holding the cross members. Put the washers between the cross members and the car. If its your transfer case I dont think there is much you can do about that?

 

nah its not those, the braces are fine, i believe its the transfer case, that black piece right above the exhaust hangers.. I need someone to help me fabricate it or somethin, like extend the hangers some how..