***Official Ohio Chat Thread***
Have you sold those wheels yet? I've kinda been eyeing them. Is the vibration pretty bad @70+mph? I noticed a lot of vibration with my winter wheels and tires, I couldn't decide if it were my wheels or the blizzaks. My BBS's with summer tires are like butter up to 140 LOL
No it's not that bad, but it was there, it might be just a combination of 2 wheels (i remember putting rotating them, and it would change, but in any case vibration is not bad at all)
And yes I still have them
And yes I still have them
Hey, Im in the columbus area and have some stock 9 rims with good kumho tires in good shape for sale. If anyones interested send me and offer. Im not set on any value so i'll consider almost any offer. Also if your interested I can send some pictures
I also have been to the forced4 meets in valley view. During the summer there is also a meet @spaghetti warehouse in Akron, lots of evo owners down there.
I have a HKS downpipe for sell at the moment. Had it on the car about 8 months, its in pretty good shape. I live in brunswick if you wanted to come look at it. I recommend a downpipe if your gonna do a catback, even if you keep your cat on.
Let me know if your interested
I have a HKS downpipe for sell at the moment. Had it on the car about 8 months, its in pretty good shape. I live in brunswick if you wanted to come look at it. I recommend a downpipe if your gonna do a catback, even if you keep your cat on.
Let me know if your interested
I was gonna call Buschur about this so I can be properly prepared before I get tuned, but I thought I'd ask you guys for suggestions on additional equipment/mods to maximize my gains given the mods that I currently have. My current set-up is:
Perrin 3" downpipe
Perrin 3" high-flow cat
3" eBay exhaust
AMS Lower Intercooler Pipe
AMS intake
Fidanza 3.2 clutch & aluminum flywheel
I probably won't do cams or a turbo upgrade anytime soon, for what it's worth. Any suggestions on supporting mods prior to getting tuned? Thanks for any info that you might suggest!
~Steve
Perrin 3" downpipe
Perrin 3" high-flow cat
3" eBay exhaust
AMS Lower Intercooler Pipe
AMS intake
Fidanza 3.2 clutch & aluminum flywheel
I probably won't do cams or a turbo upgrade anytime soon, for what it's worth. Any suggestions on supporting mods prior to getting tuned? Thanks for any info that you might suggest!
~Steve
I was gonna call Buschur about this so I can be properly prepared before I get tuned, but I thought I'd ask you guys for suggestions on additional equipment/mods to maximize my gains given the mods that I currently have. My current set-up is:
Perrin 3" downpipe
Perrin 3" high-flow cat
3" eBay exhaust
AMS Lower Intercooler Pipe
AMS intake
Fidanza 3.2 clutch & aluminum flywheel
I probably won't do cams or a turbo upgrade anytime soon, for what it's worth. Any suggestions on supporting mods prior to getting tuned? Thanks for any info that you might suggest!
~Steve
Perrin 3" downpipe
Perrin 3" high-flow cat
3" eBay exhaust
AMS Lower Intercooler Pipe
AMS intake
Fidanza 3.2 clutch & aluminum flywheel
I probably won't do cams or a turbo upgrade anytime soon, for what it's worth. Any suggestions on supporting mods prior to getting tuned? Thanks for any info that you might suggest!
~Steve
A fresh set of plugs is always a good thing depending on mileage on the current ones.
Also perform a boost leak test if possible to make sure you won't be getting robbed of any power while tuning.
fuel up on the way to tuning so the tuner won't have to worry about it.
clean out the inside of your car "if your a pack rat" lmao.
other than that good luck with the tune man!!
Hey guys, for anyone who's interested I'm selling some stock parts.
I have:
Stock 9 injectors (560cc?)
Stock 9 Intercooler
Stock 9 mivec Cams
And also,
Injen lower IC piping
Synapse Blow off valve (still on the car)
I'm also looking for an upper IC pipe with a tial flange welded, preferably one that fits the stock battery set up but i would be ok with a Buschur upper IC.
Bring on the Spring!
I have:
Stock 9 injectors (560cc?)
Stock 9 Intercooler
Stock 9 mivec Cams
And also,
Injen lower IC piping
Synapse Blow off valve (still on the car)
I'm also looking for an upper IC pipe with a tial flange welded, preferably one that fits the stock battery set up but i would be ok with a Buschur upper IC.
Bring on the Spring!
Well, finally got around to take some pics of it.
Would have went somewhere else to take picture, but don't really know any good places.
2006 350z 6mt, Touring edition...










Would have went somewhere else to take picture, but don't really know any good places.
2006 350z 6mt, Touring edition...












