The good man called me the other day and asked if he should swing by the beginning of August....WHO WANTS IN?!?!?

He offers things as basic as springs/swaybars, and as extreme as full race coilovers. As far as set up and install, there is no equal to a Robispec custom cornerweight/alignment.

Add you name to te list, let's get him back here; I want me V3's refreshed .

And also, anyone with not much done to their Evo, I highly recommend you invest in suspension right away....it's still the best mod I have done to date.

350 whp is fun, but when you can use all of it WOT through a turn, it's a lot more fun .

 

any idea of the charge for a corner balance and alignment?

 

These were the prices for the last "event" I setup, prices might have changed.

****PRODUCTS****
*Aformentioned SPRINGS for Evo VIII/IX- $260.
*Front roll center Kit- $300 installed.
*Front swaybar- $450 installed.
*Rear bump steer kit- $195 installed.
*Rear sway bar- $250 installed.
*Rear trailing arm- $145 installed.

*KW Variant 3 "Street"- $2100 (add $800 for above 3 with install and shipping; add $300 more for the front roll center kit.)
*KW Variant 3 "Clubsports"- $2800.
*KW Variant 3 "Race"- $3500.

-the differences between the versions of coilovers from KW is the valving and the spring rates. These coilovers speak for themselves .

***SERVICES****
*Corner balancing- $250
*Alignment- $180
*Fender rolling- $300




1.) Kunal- Refresh V3's, fender rolling, touch-up alignment.
2.) Mitch- Refresh V3's.
3.)

 

any ideas whereabouts the work will be done? Do you think he could do the roll center, bump steer, corner balanace and alignment in 1 day?

 

Yes he can finish everything in one day I'm sure. We need to figure out where we're hosting this time time around. Mitch PM me.

 

Does he work on any kind of coilovers or only KW?? I have stance coilovers.

 

he works on any coilover/spring.

 

I've been talking to Robi lately and I'll be there for sure I couldn't be happier with his V3s - simply fantastic!

1.) Kunal- Refresh V3's, fender rolling, touch-up alignment.
2.) Mitch- Refresh V3's.
3.) Richard - corner balance, tweak alignment, roll center kit installation, possibly rear fender rolling

 

I'm in for a corner balance and alignment.

 

Thanks for updating the list in here for me Kunal.

As for where the work will be performed, we're going to try and set up a time at good 'ole Devo Tuning. Just gotta hear back from the main man first.

 

what do you mean by refresh?

 

Mitch, talk to Adam first, seems from last time he has a salty taste in his mouth.

 

+1 on this

What exactly is a refresh? I know you guys daily drive your evos.... So im wondering what exactly this entails???

 

Any updates? Robi had told me he'd like to come over in the first few days of August, which doesn't leave much time left!

 

So is anything coming of this??? I am wanting most of the bushings replaced in the front along with new strut mounts (either monoball or Grp. N), some bushings in the rear, and for Robi to massage my alignment again.