Ok, currently I have the 6" magnaflow muffler in place of the Buschur exhaust testpipe. Its clamped in place to a 2 bolt flange to make to the downpipe and slip fit for the Buschur slip fit catback.

If your looking to make your car a bit more quieter and have either a regular test pipe or bullet test pipe I can trade with you. It doesnt matter to me which test pipe you have since my VT muffler makes the car stock quiet regardless. But it has to be Buschur flange on one end and slip fit on the other end.


Exactly how this looks from my old setup. Just that the flange side is not welded but slip fit over the 2 bolt flange pipe and clamped with the same band clamp as the other end. It works perfectly with buschur or almost any downpipe with Buschur slip fit catback.

 

Oh wow. My dream setup. I would trade you my resonator for that right away but the midpipe still has a 2-bolt flange. If you have some tools, I'd be willing to cut the resonator and my midpipe to fit this thing on.

 

It most likely wont work because the cut off part probably wont slip over my catback. Its like trying to connect 2 pipes that are both 3" in diameter. One needs to be slightly larger to fit over.