Notices

Parts needed!

Thread Tools
 
Search this Thread
 
Old Feb 18, 2009 | 12:15 PM
  #1  
LV///R's Avatar
Thread Starter
EvoM Guru
15 Year Member
Liked
Loved
Community Favorite
iTrader: (36)
 
Joined: Mar 2006
Posts: 1,593
Likes: 226
From: US
Parts needed!

Hey man,

I need the following three parts shipped to 57106!

1) Part number MF660064

2) Also need a gasket that fits between the hotside and 02 housing (Turbine Outlet Gasket).

3) I need ONE bolt that holds 02 housing to the hotside (It's 1 of 3 that hold the 02 housing onto the hotside; also it's in the picture below).

Here's a picture if necessary.


I'd need the bolt that goes into that threaded hole on the bottom left side of the picture there.



Thanks again!
Brent
Reply
Old Feb 18, 2009 | 12:47 PM
  #2  
OhsixIXBish's Avatar
Evolving Member
iTrader: (4)
 
Joined: Jul 2008
Posts: 476
Likes: 0
From: Perryville, MD
pm me on what exactly your talking about i may have what you need. u pay shipping its urs if i have the one you need.
Reply
Old Feb 18, 2009 | 02:15 PM
  #3  
RussellM's Avatar
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by ill_take_one
Hey man,

I need the following three parts shipped to 57106!

1) Part number MF660064

2) Also need a gasket that fits between the hotside and 02 housing (Turbine Outlet Gasket).

3) I need ONE bolt that holds 02 housing to the hotside (It's 1 of 3 that hold the 02 housing onto the hotside; also it's in the picture below).

Here's a picture if necessary.


I'd need the bolt that goes into that threaded hole on the bottom left side of the picture there.



Thanks again!
Brent
Hey Brent, email me that picture russellm@brucetitus.com I can see most hosed images due to our internet restrictions
Reply
Old Feb 19, 2009 | 06:39 AM
  #4  
RussellM's Avatar
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by ill_take_one
Hey man,

I need the following three parts shipped to 57106!

1) Part number MF660064

2) Also need a gasket that fits between the hotside and 02 housing (Turbine Outlet Gasket).

3) I need ONE bolt that holds 02 housing to the hotside (It's 1 of 3 that hold the 02 housing onto the hotside; also it's in the picture below).

Here's a picture if necessary.


I'd need the bolt that goes into that threaded hole on the bottom left side of the picture there.



Thanks again!
Brent
Is that a stud or bolt in the picture? Im going to assume the bolt because you said '3' and there are 3 bolts and 2 studs.

LINK
http://www.mitsubishiparts.net/cart/...62961+MD132933


02 Housing To Turbo Gasket
MR299686


BOLT - MD062961
WASHER - MD132933
OR
STUD - MR224441
Reply
Old Feb 19, 2009 | 07:18 PM
  #5  
LV///R's Avatar
Thread Starter
EvoM Guru
15 Year Member
Liked
Loved
Community Favorite
iTrader: (36)
 
Joined: Mar 2006
Posts: 1,593
Likes: 226
From: US
Yeah it's the bolt I need. The two studs are still fine, so I'm leaving those alone!

I added a couple washers to the order as well!

I appreciate it/order placed!
Brent
Reply




All times are GMT -7. The time now is 08:52 AM.