Part number request
Thanks ^
I got rear ended recently and the body shop did a ****ty job bending the bracket.
I hope this works with my modded crash beam.
The crash beam definitely worked, didn't even get damaged at 10mph. Just made 2 holes in my JDM rear and bent some sheet metal.
I got rear ended recently and the body shop did a ****ty job bending the bracket.
I hope this works with my modded crash beam.
The crash beam definitely worked, didn't even get damaged at 10mph. Just made 2 holes in my JDM rear and bent some sheet metal.
Thread Starter
Joined: May 2007
Posts: 3,619
Likes: 29
From: @ a track near you
Please correct me if I'm wrong, but to mount everything up I think I need these:
You will need to tell me the quantities though!
This link will exclude the one bracket and the flap you are asking for. Those will have to come from Japan.
Once we get some of these parts back in stock and have all the newer small products in, we will have complete bumper kits people will be able to purchase to ease the shopping experience. We usually dont offer those sorts of things until we get ourselves all straightened out with parts.
Please Follow the Link Below
http://www.mitsubishiparts.net/cart/...8*2+MS470075*3
Once we get some of these parts back in stock and have all the newer small products in, we will have complete bumper kits people will be able to purchase to ease the shopping experience. We usually dont offer those sorts of things until we get ourselves all straightened out with parts.
Please Follow the Link Below
http://www.mitsubishiparts.net/cart/...8*2+MS470075*3
I need the part number(s) for the eccentric bolt on the front suspension (between the strut and the hub) used to adjust the camber (both sides in case there are different). 2005 Evo 8 MR - thanks!
Never mind, I found it.
Never mind, I found it.
Last edited by voidhawk; Oct 8, 2011 at 07:08 PM.
Thread Starter
Joined: May 2007
Posts: 3,619
Likes: 29
From: @ a track near you
This link will exclude the one bracket and the flap you are asking for. Those will have to come from Japan.
Once we get some of these parts back in stock and have all the newer small products in, we will have complete bumper kits people will be able to purchase to ease the shopping experience. We usually dont offer those sorts of things until we get ourselves all straightened out with parts.
Please Follow the Link Below
http://www.mitsubishiparts.net/cart/...8*2+MS470075*3
Once we get some of these parts back in stock and have all the newer small products in, we will have complete bumper kits people will be able to purchase to ease the shopping experience. We usually dont offer those sorts of things until we get ourselves all straightened out with parts.
Please Follow the Link Below
http://www.mitsubishiparts.net/cart/...8*2+MS470075*3
What do you think?
Thread Starter
Joined: May 2007
Posts: 3,619
Likes: 29
From: @ a track near you
Does anyone know the part number for an oem evo9 bumper. I have one on my 8 but recently got In an accident. I just wanna make sure the body shop puts the same bumper back on and they asked for the part number. Also if They will need anything different to mount it. Would be greatly appreciated I can seem to find it online.
Thread Starter
Joined: May 2007
Posts: 3,619
Likes: 29
From: @ a track near you
