Notices
North Texas Evo Club (NTEC) For discussions in and around North Texas

COBB Tuning Plano is Expanding!

Thread Tools
 
Search this Thread
 
Old Feb 16, 2012 | 10:10 AM
  #1  
COBB Tuning's Avatar
Thread Starter
Former Sponsor
 
Joined: Oct 2008
Posts: 539
Likes: 1
From: USA
COBB Tuning Plano is Expanding!

Big Expansion Party Thread here! - March 24

Well as some have may have heard or noticed, our little shop of about 5,000 sq. ft. that we opened in October of 2008 was easily at capacity after about two and half short years later around March of last year.

Last year was tough as we were cramped on space, neighbors that didn't like us running our dyno during the middle of the day, battling a brutal Texas Summer just to name a few issues. In October, our neighbor to the south ended their lease with their space and we took this opportunity to expand our shop in a BIG way! 7,000 additional sq.ft! Most of which, is shop space with addition to our front-end offices.

We are currently in the final stages of the process and will be hosting a big party sometime in March to celebrate and have a big open house for all of our loyal customers and the aftermarket community as a whole.

In the meantime, enjoy the photo updates we'll be sharing with you guys!

The new 7,000 sq ft expansion in its beginning stages of renovation before combining with our original space. As you can see at this point, insulation had just been installed.










Last edited by COBB Tuning; Mar 1, 2012 at 11:03 AM.
Reply
Old Feb 16, 2012 | 10:35 AM
  #2  
mt057's Avatar
Evolved Member
iTrader: (6)
 
Joined: Apr 2007
Posts: 1,529
Likes: 12
From: DFW
Looks good. Congratulations on the new space!
Reply
Old Feb 16, 2012 | 12:38 PM
  #3  
Chef-j's Avatar
Evolved Member
iTrader: (16)
 
Joined: Nov 2009
Posts: 951
Likes: 7
From: Dallas, TX
Congrat guys.
Reply
Old Feb 16, 2012 | 02:26 PM
  #4  
TxEvo8's Avatar
Evolved Member
iTrader: (5)
 
Joined: Oct 2004
Posts: 1,123
Likes: 0
From: DFW
Congrats! Can't wait to see it when it is done.
Reply
Old Feb 16, 2012 | 08:41 PM
  #5  
DEVO330's Avatar
Newbie
iTrader: (1)
 
Joined: Jan 2005
Posts: 68
Likes: 0
From: Mansfield & MotorSportRanch
congrats,
sorry i haven't been up to watch the progress, but
i'll definitely be up there for one of your famous parties!!
Reply
Old Feb 16, 2012 | 09:36 PM
  #6  
Pirana's Avatar
Evolved Member
iTrader: (43)
 
Joined: Dec 2003
Posts: 1,222
Likes: 5
From: Arlington, TX
Congrats, that shows your customers support you and your business! Now what the hell is that truss doing in the middle?!
Reply
Old Feb 17, 2012 | 08:05 AM
  #7  
dazz's Avatar
Evolving Member
 
Joined: Dec 2001
Posts: 147
Likes: 0
From: DFW, Texas
You guys moving the dyno to the new location or leaving it next to the cramp entry?
Reply
Old Feb 17, 2012 | 09:41 AM
  #8  
Kracka's Avatar
Evolved Member
iTrader: (49)
 
Joined: Apr 2007
Posts: 8,970
Likes: 17
From: Prosper, TX
Looks great guys, I'm excited for it to be completed!
Reply
Old Feb 17, 2012 | 10:24 AM
  #9  
COBB Tuning's Avatar
Thread Starter
Former Sponsor
 
Joined: Oct 2008
Posts: 539
Likes: 1
From: USA
Some photos of the insulation being pin welded in place and covered.







Reply
Old Feb 20, 2012 | 08:35 AM
  #10  
COBB Tuning's Avatar
Thread Starter
Former Sponsor
 
Joined: Oct 2008
Posts: 539
Likes: 1
From: USA
Installers leaving a gap of insulation for an HVAC unit to come through the roof


Here you can see the entire ceiling being almost complete and the the beginning structure of the interior shop wall being erected





Interior shop wall with drywall installed on the right side.
Reply
Old Feb 20, 2012 | 09:35 AM
  #11  
BambiTLK's Avatar
Newbie
 
Joined: Mar 2007
Posts: 42
Likes: 0
From: Dallas, TX
Looks amazing! And just in time for my next round of mods!
Reply
Old Feb 21, 2012 | 08:48 AM
  #12  
COBB Tuning's Avatar
Thread Starter
Former Sponsor
 
Joined: Oct 2008
Posts: 539
Likes: 1
From: USA
Today's update shows the completion of the roof insulation as well as the back wall being insulated!





Reply
Old Feb 22, 2012 | 10:09 AM
  #13  
COBB Tuning's Avatar
Thread Starter
Former Sponsor
 
Joined: Oct 2008
Posts: 539
Likes: 1
From: USA
Update #5: The back wall separating the front of the shop from the offices is complete along with the HVAC system installed! (Roof shots of units being installed coming soon!)





Reply
Old Feb 22, 2012 | 10:23 AM
  #14  
NocturnalEVO's Avatar
Evolved Member
iTrader: (39)
 
Joined: Mar 2004
Posts: 3,957
Likes: 1
From: NY
subscribed. would love to see more pics!
Reply
Old Feb 22, 2012 | 10:54 AM
  #15  
COBB Tuning's Avatar
Thread Starter
Former Sponsor
 
Joined: Oct 2008
Posts: 539
Likes: 1
From: USA
Originally Posted by NocturnalEVO
subscribed. would love to see more pics!
more are coming for sure!
Reply



All times are GMT -7. The time now is 05:16 AM.