Having stalls or drops rpms with A/C on. Its getting annoying and not safe on road. I found couple things i can try but needs log.

Do anyone have tactrix cable and knows how to adjust little things? EvoD is closed untill monday.

Thanks.

 

Just sold mine...wish I could help

 

Do the 8/9 have the same issue with an intake that the X's have? On the X, a shield is needed since the fans will suck the air out of the intake causing stalls.

 

Not to the same extent due to air filter placement; I know it took me quite of while to get my idle control motor tables properly setup for the heat with A/C on with big cams and a lightweight flywheel.

 

I dont think so. Because it drives perfecr without A/C. That is why i didnt know this untill it gets hot out here.

 

Car has fp4r and stock flywheels.

Im going to fix this for sure. If it cause by cams, im willing to go back to stock cams. I almost hit other car on road because it shut off...im not going to let this happen again.

So far what i know is some fixed this adjust on ECU...

 

I had FP4R's too; let me know if you want help adjusting the tables.

 

Thanks, i will defi let you know if i can get one in hands before kevin gets back

 

I have a cable if you feel like coming out to watauga...

I had to adjust the idle stepper look up table and the desired idle rpm with a/c on.

 

I've got one, don't remember what version it is. You're welcome to come borrow it. I'm in N. Dallas/Richardson.

 

I dont mine drive if i can fix this issue. Do this cable works with my laptop if i download evoscan&flash?

Edit: btw thanks guys

 

It will work with my laptop for sure . Come over and I will take a look at it.

 

I have one as well. I live in far N. Dallas. PM if you want to use it.

 

I actually just paid to one of Evom member and it should be here next week.

I met up with MT057, he helped me out adjust on table. and showed me how Evoflash/Evoscan works (Big thanks!!). The good is car doesn't stalls out and it did better when i stuck in traffic now. But there is still dropping idle when i pressed clutch. I think it can get better.
Well i tried what i want. Now i will wait untill EvoD gets back, maybe there is more things to look at. i hope they aren't too busy after they back from colorado.

Thanks guys!!!