well, it all started out w/ just getting rid of the whole WGA and turning the stock turbo into an external wastegate setup, and installing a direct port setup, but it somehow got turned a whole turbo upgrade...

the turbo is a Turbonetics T76 DBB and it'll have a custom made downpipe, exhaust manifold (might be topmount) and a twin wastegate setup, as well as other minor custom stuff, the only thing holding me back now from some real power is obviously the the stock block/head combo, so i'll only be limited for a pump gas tune, but with this turbo, and the mods that i've got, it'll be over 500awhp which is somewhat already pushing the limit, untill i can get my hands on a buschur stg 3 combo ....here's a pic and i'll try and get more of the work in progress...and sorry for the ****ty quality as they were taken w/ my phone, i've got more of it compared to the stock turbo that i'll try and put up tomorow...

 

That is a huge turbo. That thing may hit full spool ~6,500 RPM. That turbo is larger then a GT42R.

 

good thing you got nos your gonna need it to get that thing spooling.

 

yeah, i'm hoping it'll be around 6k for full boost, but when it hits, it'll hit pretty hard

 

yeah, but unfortunately i cant use it on the stock block cuz it'll for sure blow the engine up

 

here's a pic of it next to the stock turbo lol

 

the upgrade is the one on the right..cause i cant tell a difference..LOL! looks like it will be lots of fun when that monster hits boost...hope nothing breaks on you when you hit boost. good luck

 

sickness!!, you should be able to run a 50 hp spool up shot, I would be more worried about the turbo and the internals then a progressive spool shot.

 

lol...thanks man, yeah, i'm hoping to get by w/ nothing breaking untill i can finish the build later by the end of summer, beginning of fall hopefully


and sleeper, i wont be using the n2o becuase even if i did want to do a 50 shot, i cant becuase it is a direct port, so the smallest would be an 80 and that will for sure blow the engine up

 

we have a extra block at the shop i part time at if you wanna pick that up so you have less down time when the build starts...

 

sweet, how much you looking to get for it????

also, do you have any heads lying around

 

I got a 1G head layin around, you could flip it backwards :-)

 

"hard"?

Jesus that's the understatement of the year. You're goign to go from like 300 cc's of fuel to 1600 ccs over 200 rpm.

Hard. Ha.