A good place to install car alarms?
If was to travel to JB I would recommend an installer at that location but hes up in Seattle.
The only reason I made the statement is because I used to work there and got fed up with the poor management and how they stopped caring about the quality of the install. Im not saying all the installers do bad installs but the pressure of "getting it out the door" leads to several mistakes and poor workmanship.
I know exactly what you guys are saying. Some of the locations are great because they have good installers. Some of them however are not so good. I've had minor installs done at Best Buy for free that were of better quality than some Car Toys.
Trending Topics
If was to travel to JB I would recommend an installer at that location but hes up in Seattle.
The only reason I made the statement is because I used to work there and got fed up with the poor management and how they stopped caring about the quality of the install. Im not saying all the installers do bad installs but the pressure of "getting it out the door" leads to several mistakes and poor workmanship.
The only reason I made the statement is because I used to work there and got fed up with the poor management and how they stopped caring about the quality of the install. Im not saying all the installers do bad installs but the pressure of "getting it out the door" leads to several mistakes and poor workmanship.
Stan and Ryan has been nothing less then fantastic to me, and Brian at sales is one of the coolest guy at the other side...so I do know people there.
I need my autostart hoked up on my viper. I have a good installer friend at cartoys in seattle, made a sweet setupfor me in my eclipse a while back. Would really recommend him. name is scott moore. Go see him, he will take care of you. He hooked me up with the install schematics for my autostart, I just can't read the crap! Not very literate on that side of it, add I guess!
Thread
Thread Starter
Forum
Replies
Last Post
InitialE
Evo Electrical / Audio / Security
3
Jan 29, 2010 06:56 PM




