I am coming down from Canada, just wondering if there is a body shop that could install a JDM rear bumper because I purchased one down there. Close to seattle if possible with the right tools and doesn't charge like crazy for labour haha thanks

 

Bel-kirk has experience with Evos and this should be a piece of cake for them. http://www.belkirkbodyshop.com/

If you have a rivet gun and some basic tools its actually not that hard to do yourself.

 

Yeah, takes about an hour for the whole process for first timers. Takes me about 40 mins since I've already installed 3 JDM bumpers

http://www.socalevo.net/forum/index.php?topic=27831.0

 

I've done it before..the problem is I don't know anyone in seattle that have or can lend me a rivet gun. I was thinking of probably coming down and leaving the same day back to Vancouver. Right now the good part is..the brackets for the rear bumper has no rivet taps or whatever...I used a bolt and a nut to hold the bracket and bumper together haha

 

Bel-kirk is what i'd say

 

dude a rivet gun at harbor freight is 8$..

 

+1--^

rivet guns are real cheap. besides that all you need is a drill and a few sockets. very easy to do your self

 

I have a rivet gun and drill you can borrow for a couple hours. Let me know if you're interested. FYI, the new bumper should come with rivets.

 

Thanks guys! If anyone can help me do it I'll tip! haha