Hi guys, I'm new here.

After noticing that the RVR likes to lean when turning and has quite a bit of understeer I ordered a front strut brace and rear beefier sway bar. The front bar went in with no problem and it already cured the understeer to an acceptable level but the rear sway bar I'm told was made for a 2WD and I have a 4WD model. I've been looking and looking but so far don't see a sway bar for the 4WD RVR and still feel that it can take quite a reduction on the lean. Am I missing something?

Cheers,

JV

 

From what I understand, the rear sway bar from the Lancer and Ralliart will fit our rear ends. So, with that, you can pick up a nice 22mm rear sway bar from Road Race Motorsports. Its 2-way adjustable and should be what you are looking for. If not, theres a 4-way adjustable 24mm rear sway bar for Lancer Ralliarts from Whiteline from AMS Performance. Both should provide a significant difference in handling for you.

 

Are you positive on the rear sway bar fitment from the rally arts fitting on the AWD O.S.?