Acronyms
 

Heres what some of the acronyms that we use to help out with the people who dont know,

SRI- Short Ram Intake
CAI- Cold Air Intake
CEL- Check Engine Light
TIA- Thanks In Advance
RA - RalliArt
IMO - In My Opinion
IMHO - In My Honest Opinion
S&S - Sun And Sound
TY - Thank You
FYI - For Your Information
RRM - Road Race Motorsports
NOOB - pronounced "new bee"
CF - Carbon Fiber
JDM - Japanese Domestic Market
FS - For Sale
WTB - Want To Buy
HID - High Intensity Discharge
ECU - Electronic Control Unit
OEM - Original Equipment Manafactured
SES: Service Engine Soon
DSM = diamond star motors (mitsubishi)
BTW - By the way

Thats all I can think of now, any more than i forgot please feel free to contribute.

Front Sidemarker Light Bulb
 

If you are trying to replace the sidemarker lights on your lancer, the bulb size is 194 wedge. You can get them at www.superbrightleds.com or www.autolumination.com Make sure you get LED's and not standard bulbs, they fade out too fast and arent bright for sh*t.

otay, well I need a turbo for an automatic and RRMS only has the five speed. Where should I look?

what is our chassis code?

Man If you think that you woun't buy from accolade your crazy the kit on importtrends is ugly. I think that the eyelids that accolade are sweet.

I'll conferm they dont the Mitsu dealer was gunna give me a set and they were way off on the bolt offset

Our chassis code is CS7A, it's on the firewall in the engine bay.

Aftermarket Steering wheels
 

ANY aftermarket steering wheel will fit, however you will need a hub adapter. You can get the "splash" hub adapters from Z-1 here on the vendor website. And as far as I know, any adapter made for an evo 7 and 8 will fit on our cars. Here is the link, http://www.z1auto.com/prodmore.asp?m...ior&prodid=928
or you can get the new and much cheaper momo hub adapter here http://ltbmotorsport.com/mohubadkitwi.html

Do Evo 8 seats fit our cars?
 

Yes, the brackets the evo 8 seats come on are the same as ours, so they should bolt right up.

Turbonator & Spiralmax, do they work?
 

NO. Just another hype to make money off of you.

http://w02.us/resources/GIF/05_lancer_spec.gif
..

I want to mod my car, what mods are out there?
 

Engine

RRM Cold Air Intake - www.roadracemotorsports.com
Short Ram Intake - www.roadracemotorsports.com
Injen Cold Air Intake - www.injen.com
AEM Cold Air Intake - www.aempower.com
Turbo Kit (Manual transmission only) - www.roadracemotorsports.com
Piggyback ECU - www.roadracemotorsports.com
Port and Polished Intake Manifold - www.roadracemotorsports.com
Pulley Kit - www.roadracemotorsports.com

Transmission

Stage 1 Clutch Set - www.roadracemotorsports.com
Flywheel - www.roadracemotorsports.com www.unorthodoxracing.com
Stainless Steel Clutchline - www.roadracemotorsports.com
Stage 1 and 2 Clutch Kit - Workz (look on vendor forums for link)


Exhaust

Cat-Back Exhaust System - www.ultimate-racing.com
Axle-back Exhaust System - www.roadracemotorsports.com

Suspension

Progress Lowering Springs - www.progressauto.com
Tein Lowering Springs - www.tein.com
Tein Basic/Super Street Coilovers - www.tein.com
Nextech Coilover Springs (no struts) - www.500whp.com
Progress Rear Sway Bar - www.progressauto.com
Lower Tie Bar - www.roadracemotorsports.com
Rear Upper Tie bar - contact "PDXralliart" on these boards for a sun and sound application, www.roadracemotorsports.com

What parts are NOT made for our cars?

1) Header
2) Camshafts
3) Cam Gears
4) Supercharger
5) Many more but these are the most basic ones I get asked a lot.

i got a quick ?....

would you have to drew new holes for the evo 7 & 8 wings??

Yes or no, depending on the wing. Just assume that you do, and it'll be a nice surprise if you don't have to. When you do need to drill, it's only two holes, as the other holes line up.

-works sells a stage 1 and 2 clutch kit along with a flywheel
-unorthodox racing sells a flywheel