good luck
|
Originally Posted by Mick_O
(Post 11806221)
So I've pulled the trigger on a built 6 speed. Its due in about a months time hopefully. We are coming up with a 4.3 final drive ratio so its a tad taller than factory with a OS Giken RC2D going in. Will report back when its back in the road.
:( |
where are you getting the 4.30 final from?
|
I had 430/388 on my last setup, no problems. Finishing up the new build and had planned on going with a built transmission. Love my 6 speed 🤙🏼 |
Originally Posted by kaj
(Post 11806303)
I'm so jealous! I'd love to have mine built, but I'm having trouble justifying the cost when I have a 5spd swap just sitting in my garage...
:( |
Originally Posted by kyoo
(Post 11806431)
never going 5 against for my car. i absolutely love my 6 speed, coming from a built, shep trans with ultimate ratios. that is perfect for a track car, which mine is not
|
Originally Posted by TrendSetter
(Post 11806405)
where are you getting the 4.30 final from?
|
https://cimg8.ibsrv.net/gimg/www.evo...86158333a3.pngSo these are the stock ratios theoretical speeds
|
https://cimg1.ibsrv.net/gimg/www.evo...03bfbdc877.pngThis is the 4.3 ratio theoretical speeds
|
Should be fine as long as you have the torque to deal with the larger gap between gears. {thumbup}. On road courses, I find myself using 5th quite a bit. I'd like to be able to stay in 4th.
Actually... I wish we could pick our gearing for each. I'd run a super tall 1st, closer ratio up to 5th, then keep a tall 6th for the days I have to drive to the track LOL. |
Originally Posted by kaj
(Post 11806505)
Should be fine as long as you have the torque to deal with the larger gap between gears. {thumbup}. On road courses, I find myself using 5th quite a bit. I'd like to be able to stay in 4th.
Actually... I wish we could pick our gearing for each. I'd run a super tall 1st, closer ratio up to 5th, then keep a tall 6th for the days I have to drive to the track LOL. |
I’m definitely the odd one who will be going back to the 6 speed for my MR after swapping in a 5 speed. I’ve had my old transmission rebuilt by Jacks with their gear set and will be installing a trans cooler this time |
Originally Posted by Laxman
(Post 11807092)
I’m definitely the odd one who will be going back to the 6 speed for my MR after swapping in a 5 speed. I’ve had my old transmission rebuilt by Jacks with their gear set and will be installing a trans cooler this time |
Originally Posted by kyoo
(Post 11807095)
they have a 6 speed trans cooler?
If someone is still doing rebuilds on the future, I'll have mine done. If not...sequential? 😁 I dislike the 5spd that much. LOL |
Originally Posted by kaj
(Post 11807194)
You have to fab one up. I made a parts list and started to collect fittings until my 6spd started acting up.
If someone is still doing rebuilds on the future, I'll have mine done. If not...sequential? 😁 I dislike the 5spd that much. LOL |
All times are GMT -7. The time now is 08:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands