Thanks guys! I have a new coil arriving today so hopefully that fixes the last issue. Numbers to come soon!!
|
New Coil?.... You need 4:p
|
Originally Posted by SparkTech
(Post 6951816)
New Coil?.... You need 4:p
|
Still need registration and inspection which I'll get done on Monday. I did however put a couple miles on it today on the back roads by the shop! Maiden voyage is complete!
http://i21.photobucket.com/albums/b2...m/IMG_2406.jpg http://i21.photobucket.com/albums/b2...m/IMG_2397.jpg http://i21.photobucket.com/albums/b2...m/IMG_2400.jpg |
Is putting the hood back on listed in the "to-do" list:lol:
I just went for a test drive after finishing the re-worked turbo kit and accusump install. |
Originally Posted by 11secDSM
(Post 6951957)
I loaned out one of my IX coils...so i'm just getting that one back for now. :lol: I need to find some scratch to buy a set from you Craig!!!
BTW the car is looking SWEET...even with the hood off:mitsu: |
Hot!!!!!!!!!!!!
|
Hoods are overrated!! :lol: My battery is pretty much toast from sitting for 10 months so I need a new one...kept the hood off and jump pack handy in case it stalled at a light. :crap: :D
Jared- any pics of the accusump setup?? |
Should be a killer
|
Originally Posted by 11secDSM
(Post 6956619)
Hoods are overrated!! :lol: My battery is pretty much toast from sitting for 10 months so I need a new one...kept the hood off and jump pack handy in case it stalled at a light. :crap: :D
Jared- any pics of the accusump setup?? My battery was lame as well after sitting. But a couple of days of driving and it was good as new. I'd give it some time and see if it comes around. |
Final short list of mods...
Engine Crower Rods Wiseco HD stroker pistons Eagle stroker crank Fluidampr GSC CNC'd head GSC beehive springs Supertech 1mm oversized valves Supertech bronze valve guides GSC S2 cams Fidanza adjustable exhaust cam gear JMF small battery kit JMF coolant catch can HKS carbon timing belt Intake JMF SMIM JMF 2.5" piping JMF/Garrett FMIC JMF 4" intake BW S362 Exhaust JMF tubular exhaust manifold GV Autosport downpipe GV Autosport test pipe HKS carbon catback Fuel FIC 1050cc injectors Bosch 044 pump -8AN feed line -6AN return line Aeromotive AFPR Transmission Shep race trans Evo 8 3/4 4.11 final drive Exterior JDM Mitsubishi rear bumper VIS carbon lip APR carbon front splitter Rexpeed carbon side splitters Rexpeed carbon rear bumper side splitters Suspension KW Variant 3 coilovers Carbing aluminum strut bar 5zigen FN01R 17x9 Dunlop Direzza Z1 Star Spec 255/40-17 Electronics/Tuning Stock ECU Autometer gauges AEM wideband Interior Binary seat lowering brackets Powdercoat/Ceramic All powdercoating by Martin at Liquid Powder Coats All ceramic coating by Chuck at Bonehead Performance ...and of course thank you to everyone who helped out- Joe, Chris, Steve, Carl, Nick, Corey, Justin, Mike. Also thanks to all the vendors who helped get parts to me quickly- John at Weldon Machine, Greg at GSC, John at Shep Trans. No thanks to the wheel company that wasted 6 weeks of my time. :roll: |
Rexpeed carbon side and rear diffusers installed. I'm SO glad I threw these on....
http://i21.photobucket.com/albums/b2...m/IMG_2411.jpg http://i21.photobucket.com/albums/b2...m/IMG_2412.jpg http://i21.photobucket.com/albums/b2...m/IMG_2414.jpg |
I really like the look of the Rexpeed carbon sideskirt extentions, nice choice. {thumbup}
When can we expect to see this thing on the road? |
Today! :)
|
The Rexpeed parts look awesome on there! I've wanted to buy a bunch of there parts but it sucks cause they don't have a VII carbon front lip to match the rest of the body or I'd probably go for it. Can't wait to see it on the road soon.
|
All times are GMT -7. The time now is 04:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands