![]() |
Yeah, that used to be AdamJ's car. He sold it to Archie. That's the one I meant. :updown:
|
Oh wait! Duh I forgot all about that.
|
7 Attachment(s)
Friday evening and no where to go... :( ... So I did a photoshoot! 8)
Attachment 288397 Attachment 288398 Attachment 288399 Attachment 288400 Attachment 288401 Attachment 288402 Attachment 288403 |
2 Attachment(s)
New battery with custom tray and intake reroute. Battery location is perfect for my 4G63 swap.
Attachment 288057 Also, current project: JDM automatic climate control system using the JDM control box and Diamante LHD boxes. Attachment 288058 Project is still going, no worries! :lol: |
Originally Posted by Alchem1st
(Post 9393584)
New battery with custom tray and intake reroute. Battery location is perfect for my 4G63 swap.
http://i379.photobucket.com/albums/o...6-01162321.jpg |
^I will do that once the 4G63 is in and the final revision of the intake is built. (probably not from Spectre LOL)
|
Awesome build so far but ever think of going wingless or doing a bigger wing?
|
1 Attachment(s)
Originally Posted by FLOW1
(Post 9395079)
Awesome build so far but ever think of going wingless or doing a bigger wing?
Already have the Evo IV oem rear bumper and lip as well as the oem Evo IV tails installed. It's not in the pic, but I have the EvolutionIV badge as well. Attachment 288036 |
2 Attachment(s)
Got a couple new bits. JDM Evo 5 fuel tank! Pump and sender were removed and I'm working on cleaning it up a bit. Some rust removal and a repaint are in order.
Also, planning to rewire the pump with 10 gauge wire and the stock Evo 5 pump will be sold and replaced with Deatschwerks' new 300lph pump. This tank is one of the last major parts I need to begin my awd conversion. All I need now is a rear floor cut and a few small items like rotors and brake pads for the rear Brembos. Attachment 287770 Also, picked up a new amber lens to replace my broken one so the car now has JDM Evo 4 amber sidemarkers: Attachment 287771 |
Alot of work there....Looking forward to seeing the finished product. Good luck!
|
Thanks, it's something to do lol. Once this tank goes together, I don't want to have to take it back apart again. The seals are JDM only pieces I think so I will probably have to make them.
|
Alright so I found out that the Evo 5 fuel pump seal and sender unit seals have the same part number as the 90-94 DSM sender unit seal.
Glad they use the same parts for multiple vehicles! Got two of them on order from STM and impulse bought their fuel pump rewire kit as well. :lol: |
1 Attachment(s)
Finally back from vacation! Some new parts were waiting for me when I got home!
STM fuel pump rewire kit https://i379.photobucket.com/albums/...7-20092955.jpg 1G AWD fuel pump gaskets (same part number as Evo5 pump and sender gaskets) Attachment 287550 |
long time no see man, keep it coming
|
Originally Posted by SubieEvoGuy
(Post 9475780)
long time no see man, keep it coming
|
All times are GMT -7. The time now is 05:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands