|
Originally Posted by jimbo74
(Post 11605183)
you can put an 04 tranny into an 03 rather easily.
if you are just going to throw an 04 tranny into an 03, then yes, pretty direct swap, but you will need to make sure you have the whole arm assembly, and a new clutch slave -- as that stuff isn't the same on the 03 |
check out the threads I have here...... all this info and more is in them...... Because it was about 3-4 months ago, when I started researching this, because I had a bad 03 tranny
|
I was wondering what website to use to find the parts I'll need to put the 06 tranny in my 03
|
whatever website you want
you are going to go through quite a bit of hassle doing this swap....... are you looking for a rebuilt or what? you are going to have to find a tranny, than swap the bellhousings.... or just find the 06 trans, and make sure to but the new boot, new slave, new arm, new pivot, and new throwout bearing. you will also need to rebend, or go to a softline for the connection to the slave.... have you read my threads yet? all the info is in there |
Is it possible to take a f5m42 from a eclipse or something and split it and take the guts like the gears the shift forks and all that and transfer it over into mine
|
Originally Posted by jimbo74
(Post 11604597)
it is going to need at least the bellhousing from the 03
which means, the transmission will need to be split,taken apart, and put back together with a new housing |
Originally Posted by 3gturbo
(Post 11613485)
Im not sure about the lancer oz slave. I did use lancer internals one time when I broke my trans. The insides are all the same. All the eclipse f5m42 are the external slave design 00-12.
it is not the same as the external slave setup, and the external slave can not be made to work on the 03 bellhousing |
2002 mitsubishi lancer oz rally 5 speed
I have a 2002 Mitsubishi Lancer o-z rally 5-speed with a 4g94 motor. I am interested in doing a swap like a 4g64 or a 4G63 what all options do I have and what is the best and cheapest way to do it?
|
Evo motor to 4g94 trans
I have a 2002 lancer oz rally. Its been a good car but I want just a bit more out of it. And I was wondering if either a 4g63 or a 4g64 will bolt to the trans out of a 4g94 (f5m42). I know they share similar block but dont know what the differences are.
|
| All times are GMT -7. The time now is 02:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands