New here
Thread Starter
Newbie
Joined: Apr 2013
Posts: 2
Likes: 0
From: Canada
New here
Hey guys, Im new here and hopefully you can lead me in the right direction. Evo4 has always been my dream car, and man i finally found one where i live for 7.6 grand, I just had a couple of questions,
is there anything wrong with the 4g63t engine?
Do i need a blow off valve
Do I need a aftermarket intake?
Here is the link to the car im wanting to get. http://calgary.kijiji.ca/c-cars-vehi...AdIdZ471842435
Any tips or advice would be greatly awesome.
long live the EVO
is there anything wrong with the 4g63t engine?
Do i need a blow off valve
Do I need a aftermarket intake?
Here is the link to the car im wanting to get. http://calgary.kijiji.ca/c-cars-vehi...AdIdZ471842435
Any tips or advice would be greatly awesome.
long live the EVO
Newbie
Joined: Jan 2012
Posts: 6
Likes: 0
From: england
Hey guys, Im new here and hopefully you can lead me in the right direction. Evo4 has always been my dream car, and man i finally found one where i live for 7.6 grand, I just had a couple of questions,
is there anything wrong with the 4g63t engine? crank walk was the biggest problem
Do i need a blow off valve re circuit one keeps the turbo spining with out back presure
Do I need a aftermarket intake? no
Here is the link to the car im wanting to get. http://calgary.kijiji.ca/c-cars-vehi...AdIdZ471842435
Any tips or advice would be greatly awesome.
long live the EVO
is there anything wrong with the 4g63t engine? crank walk was the biggest problem
Do i need a blow off valve re circuit one keeps the turbo spining with out back presure
Do I need a aftermarket intake? no
Here is the link to the car im wanting to get. http://calgary.kijiji.ca/c-cars-vehi...AdIdZ471842435
Any tips or advice would be greatly awesome.
long live the EVO
Evolving Member
Joined: Nov 2011
Posts: 164
Likes: 0
From: New Zealand
BOV - Evo 9 recirculating bov will be suggested more often then not on Evom.
recirculate back into the intake so you don't sound like a tosser when you shift.
Evo 1-5 had a weak bottom end so spend sometime on that before you go wacking up the boost.
Also, just a hint, I buy all my parts through Maperformance. Shipping cost sucks because I'm so far away but all the parts for a evo8 will fit on 4-6.
recirculate back into the intake so you don't sound like a tosser when you shift.
Evo 1-5 had a weak bottom end so spend sometime on that before you go wacking up the boost.
Also, just a hint, I buy all my parts through Maperformance. Shipping cost sucks because I'm so far away but all the parts for a evo8 will fit on 4-6.
Thread
Thread Starter
Forum
Replies
Last Post