EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Project Cars / Build Threads Please post your build threads here.

Evo 9 RS Track/Road

Thread Tools
 
Search this Thread
 
Old Jan 27, 2015 | 06:16 AM
Share
  #151  
michaelrc51's Avatar
michaelrc51
Evolved Member
iTrader: (37)
 
Joined: Oct 2012
Posts: 721
Likes: 4
From: NJ
Originally Posted by _david_
The manufacturer is Aeromotive
I thought it would be some obscure manufacturer .....lol

Thanks!

Good luck with the rest of the build!
Reply
0
Old Jan 27, 2015 | 06:21 AM
Share
  #152  
_david_'s Avatar
_david_
Thread Starter
Evolving Member
 
Joined: Mar 2012
Posts: 167
Likes: 0
From: galicia
Lol

Thank you
Reply
0
Old Jan 28, 2015 | 10:52 AM
Share
  #153  
_david_'s Avatar
_david_
Thread Starter
Evolving Member
 
Joined: Mar 2012
Posts: 167
Likes: 0
From: galicia
Fitting the flex



Downpipe finished



Only rest put the heat wrap
Reply
0
Old Jan 29, 2015 | 03:43 PM
Share
  #154  
kiggly's Avatar
kiggly
Evolving Member
iTrader: (1)
 
Joined: Dec 2006
Posts: 131
Likes: 7
From: Michigan
Originally Posted by _david_
Yes, you are part of this. I have to give thanks to you and the others persons that be part of this: the companies that manufactured or sell the parts (as you), the persons that help me with the build (forum users, professionals, parents, friends, ...) and the persons that work in the build

Thank you so much
No problem at all! Thank you for sharing the build with everyone. It's builds like this that inspire others in the community to start their own project. Keep up the good work.
Reply
0
Old Jan 29, 2015 | 06:42 PM
Share
  #155  
_david_'s Avatar
_david_
Thread Starter
Evolving Member
 
Joined: Mar 2012
Posts: 167
Likes: 0
From: galicia
Thank you for your words
Reply
0
Old Feb 5, 2015 | 09:53 AM
Share
  #156  
_david_'s Avatar
_david_
Thread Starter
Evolving Member
 
Joined: Mar 2012
Posts: 167
Likes: 0
From: galicia
Oil and water turbo lines fitted. For the correct position of the oil/water holes was necessary modify the wastegate rod to open in the correct pression





Reply
0
Old Feb 8, 2015 | 03:38 AM
Share
  #157  
_david_'s Avatar
_david_
Thread Starter
Evolving Member
 
Joined: Mar 2012
Posts: 167
Likes: 0
From: galicia
The last parts to arrive

Safety Device 6 point bolt in roll cage, Alcon Race 4 pot 343mm and Ferodo DSuno front and rear pads





Rear brakes fitted

Last edited by _david_; Feb 8, 2015 at 03:46 AM.
Reply
0
Old Feb 8, 2015 | 03:47 AM
Share
  #158  
_david_'s Avatar
_david_
Thread Starter
Evolving Member
 
Joined: Mar 2012
Posts: 167
Likes: 0
From: galicia
The roll cage is the same as this

Reply
0
Old Feb 8, 2015 | 10:02 AM
Share
  #159  
uvambo's Avatar
uvambo
Evolving Member
iTrader: (8)
 
Joined: Mar 2010
Posts: 333
Likes: 1
From: Kennewick, WA
Looking good!
Are you doing Alcons on rear too?
Also who makes that bolt in cage?
Reply
0
Old Feb 8, 2015 | 10:11 AM
Share
  #160  
_david_'s Avatar
_david_
Thread Starter
Evolving Member
 
Joined: Mar 2012
Posts: 167
Likes: 0
From: galicia
Yes the picture shows the rear Alcon brakes

The roll cage is made by Safety Devices in UK
Reply
0
Old Feb 8, 2015 | 09:56 PM
Share
  #161  
uvambo's Avatar
uvambo
Evolving Member
iTrader: (8)
 
Joined: Mar 2010
Posts: 333
Likes: 1
From: Kennewick, WA
Thanks, looking great!
Reply
0
Old Feb 8, 2015 | 09:58 PM
Share
  #162  
Arrrrgh's Avatar
Arrrrgh
Newbie
 
Joined: Jan 2015
Posts: 15
Likes: 0
From: Minnesota
Insane..build
Reply
0
Old Feb 9, 2015 | 06:02 AM
Share
  #163  
markmatley's Avatar
markmatley
Newbie
 
Joined: Jan 2011
Posts: 12
Likes: 0
From: Oahu, Hawaii!
Just out of curiosity, when you're completely finished, could you give us how much Euros it cost to complete this crazy race machine? I am completely in awe of the build! My WW9 is sitting pretty in stock engine department, its getting jealous. =)

The photos from many of the first pages are down, but a lot of us can use our imaginations. If you're ever driving in the Czech Republic please let me know!
Reply
0
Old Feb 9, 2015 | 02:53 PM
Share
  #164  
_david_'s Avatar
_david_
Thread Starter
Evolving Member
 
Joined: Mar 2012
Posts: 167
Likes: 0
From: galicia
Lol thank you

The cost of the build will be around 100000€... but long time to get to this moment

I will go to Nurburgring with the car in the future. Sorry have not thought go to the Czech Republic with the car
Reply
0
Old Feb 10, 2015 | 04:22 AM
Share
  #165  
markmatley's Avatar
markmatley
Newbie
 
Joined: Jan 2011
Posts: 12
Likes: 0
From: Oahu, Hawaii!
Originally Posted by _david_
Lol thank you

The cost of the build will be around 100000€... but long time to get to this moment

I will go to Nurburgring with the car in the future. Sorry have not thought go to the Czech Republic with the car
Thats it..finish my PhD and get to making money! Great job with the awesome build!
Reply
0



Advanced Search

All times are GMT -7. The time now is 07:33 AM.