Mark this thread as Unsold
FS: Stock Evo X FMIC and UICP
Thread Starter
Evolving Member
iTrader: (2)
Joined: Mar 2005
Posts: 423
Likes: 0
From: Barstow, Cali
FS: Stock Evo X FMIC and UICP
This Stock Evo X intercooler and upper pipe had a little over 3,200 miles on it when it was taken off last weekend. This is a nice upgrade for the Ralliart guys that require the upper pipe to run the X intercooler. $300 Shipped through paypal 




Last edited by CICreations; Jun 15, 2010 at 05:15 PM.
Trending Topics
I'm interested. But $325 is too high, in my opinion, when the IC is going for $150 with less miles than yours.
$200 is a low offer for the IC and upper piping, but my offer wouldn't be too much higher than that anyway.
$200 is a low offer for the IC and upper piping, but my offer wouldn't be too much higher than that anyway.
$325 shipped isn't TOO bad...considering it comes with UICP as well...shipping would be into the $30-$40 range easily with such a large item too...
The whole point of Ralliart guys upgrading to EVO X FMIC is because its cheap...it would defeat the purpose if they buy one a stock EVO X for expensive, when they could have just gone aftermarket which will truly out flow the stock FMIC...
good luck with sale OP...
The whole point of Ralliart guys upgrading to EVO X FMIC is because its cheap...it would defeat the purpose if they buy one a stock EVO X for expensive, when they could have just gone aftermarket which will truly out flow the stock FMIC...
good luck with sale OP...
Thread Starter
Evolving Member
iTrader: (2)
Joined: Mar 2005
Posts: 423
Likes: 0
From: Barstow, Cali
$325 shipped isn't TOO bad...considering it comes with UICP as well...shipping would be into the $30-$40 range easily with such a large item too...
The whole point of Ralliart guys upgrading to EVO X FMIC is because its cheap...it would defeat the purpose if they buy one a stock EVO X for expensive, when they could have just gone aftermarket which will truly out flow the stock FMIC...
good luck with sale OP...
The whole point of Ralliart guys upgrading to EVO X FMIC is because its cheap...it would defeat the purpose if they buy one a stock EVO X for expensive, when they could have just gone aftermarket which will truly out flow the stock FMIC...
good luck with sale OP...
Thanks for the bump. I understand that the Ralliart guys want upgrades for cheap, but I don't think that $325 is outrageous considering that it's the FMIC and the UICP they need because their stock one that goes to that little cute one they have stock will not work with an Evo X core or any other aftermarket IC. Considering what I'm out to ship these items the asking price is not too high. Low ballers will always do what they do best. If I had priced it at $500 I would be getting offers for $300. If $325 is too high price an aftermarket solution from any of the current vendors FMIC +UICP after tax and shipped and then tell me the asking price is high.

I've got a local guy willing to pay $300 picked up if I wait a couple of weeks for him.
Thread Starter
Evolving Member
iTrader: (2)
Joined: Mar 2005
Posts: 423
Likes: 0
From: Barstow, Cali
Fine, I'll drop it down to $250 and you pay all the shipping costs? Sound better? When did the Evo X FMIC start "going for $150"? Just because you've seen someone sell it for that doesn't mean that's the going rate.
Thread Starter
Evolving Member
iTrader: (2)
Joined: Mar 2005
Posts: 423
Likes: 0
From: Barstow, Cali
Price Dropped.
To calculate how much shipping is going to be use the following weight and dimensions on the USPS website.
http://postcalc.usps.gov/
This is all based on me being able to find a way to get the UICP, couplers, and clamps into a single AMS FMIC box with the FMIC without damaging the fins.
Weight: 20lbs
length: 40"
Width: 19"
Height: 11.5"
My zip code is 92311
To calculate how much shipping is going to be use the following weight and dimensions on the USPS website.
http://postcalc.usps.gov/
This is all based on me being able to find a way to get the UICP, couplers, and clamps into a single AMS FMIC box with the FMIC without damaging the fins.
Weight: 20lbs
length: 40"
Width: 19"
Height: 11.5"
My zip code is 92311
Thread Starter
Evolving Member
iTrader: (2)
Joined: Mar 2005
Posts: 423
Likes: 0
From: Barstow, Cali
Both items are up on Ebay ending this evening.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110550176884&viewitem= &sspagename=STRK%3AMESELX%3AIT
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110550176884&viewitem= &sspagename=STRK%3AMESELX%3AIT


