Mark this thread as Unsold
FS: Alpine Head Unit & Amps
FS: Alpine Head Unit & Amps
Selling the system out of my Tahoe. All items were bought brand new and professionally installed. All are in excellent condition.
PM me if interested, thanks!
Alpine CDA-9835 Head Unit - $549 new. One of the best decks Alpine's made. Check out the EvolutionM review here: https://www.evolutionm.net/forums/sh...d.php?t=101000
SOLD!
26W x 4 V-Drive™ Amplifier
Bass Engine® Pro
- 6-Channel Digital Time Correction
- 6-Position HP/LP Digital Crossover
- 5-Band Parametric EQ
- Subwoofer Level Control with Phase Selector
- 3-Way or 2-Way Digital Crossover
Media Xpander™
SAT Radio Ready
MP3/WMA/CD-R/RW Playback
CD Text and MP3/WMA Tag Informtation Display
2-Line Color Display
Quick Search Function
CD Text, CD Text Display, CD Text Scroll
Versatile-Link™ Ready
MaxTune SQ Tuner
BlackOut Display
Regulated 1Bit DAC
3 PreOuts (4 volt)
iPod™ Interface Ready (KCA-420i)
MM Driver (Hard Disc Drive) Ready
MobileHub™ Ready
i-Personalize
Swing Mechanism with Detachable Face
Two Alpine MRV-T420 2 Channel Amps - $399 new each, asking ONLY $80 each shipped!!
V12 Amplifier
RMS Power Rating:
Per Channel Into a 4-Ohm Load: 110 watts x 2
Per Channel Into a 2-Ohm Load: 170 watts x 2
Bridged Into a 4-ohm Load: 340 watts x 1
STAR Topology: Alpine's unique STAR (Signal Transit for Accurate Response) Circuit PCB design provides a single common ground for all amp sub-blocks, preventing ground interference and minimizing internal noise.
Bass Engine: Bass Engine is a set of functions which help provide you with more control over your system in order to tailor the sound to your personal tastes.
Bass EQ: 0 to 12dB of bass boost, centered at 50Hz, may be dialed-in to produce the bass response desired from your system.
Built-in Variable Electronic Crossover: The built-in high-pass crossover is adjustable from 15 to 400Hz with a slope of 12dB/octave. And, the built-in low-pass crossover is adjustable from 30 to 400Hz with a slope of 12dB/octave.
Protection Circuitry: The protection circuitry guards against accidents and undesired operation. Included are Over-voltage and Thermal overload.
Controls:
Top of Amplifier: The amplifier has a metal hood that flips up to reveal the control panel. The control panel consists of the following controls:
Variable gain controls: these rotary controls allow you to match the input sensitivity of the amp to the particular source unit you are using
High-pass frequency control: this rotary control allows you to adjust the high-pass crossover frequency from 15Hz to 400Hz
Low-pass frequency control: this rotary control allows you to adjust the low-pass crossover frequency from 30Hz to 400Hz
High-pass and low-pass crossover mode selector switches: these switches allow you to select ON or OFF for the speaker outputs
Bass EQ: This rotary control allows you to adjust the boost or cut from 0 to 12dB.
Inputs and Outputs:
Battery (+12 V): gold-plated screw terminal that will accept up to 8-gauge wire or a spade up to 0.355" wide
Remote (turn-on): gold-plated screw terminal that will accept up to 8-gauge wire or a spade up to 0.355" wide
GND (ground): gold-plated screw terminal that will accept up to 8-gauge wire or a spade up to 0.355" wide
Speaker Output: 0.332" wide gold-plated terminal strips for channels 1-4
RCA Input: two sets of gold-plated RCA line input jacks
detachable front cover
blue power LED
12-7/16"W x 2-3/8"H x 11-13/16"D (depth is 10" with front cover removed)
Alpine MRD-M501 Mono Amp - $499 new, asking ONLY $110 shipped!!
V12 Amplifier
RMS Power Rating:
275 watts RMS x 1 at 4 ohms (CEA-2006 Compliant)
550 watts RMS x 1 at 2 ohms
2-Ohm Stable
MOSFET power supply and output stages
STAR Topology: Alpine's unique STAR (Signal Transit for Accurate Response) Circuit PCB design provides a single common ground for all amp sub-blocks, preventing ground interference and minimizing internal noise.
Bass Engine® features:
Low-Pass Digital Filter, 30-200 Hz, with a selectable 12 or 24 dB/octave slope
Variable Subsonic Filter (15-50 Hz in 5 Hz steps)
Parametric EQ Variable From 30-160 Hz, 12 dB
Bass Compensator Enhances Low-End Definition
Top-Mounted Digital Control Center w/ Cover
Preamp Outputs
Time Correction: 0-10 milliseconds in 0.1ms steps
Phase Adjustment: 0-180
Turn-On Delay
Extra-Large Gold-Plated Terminals
13-11/16"W x 2-9/16"H x 10-5/8"D
PM me if interested, thanks!
Alpine CDA-9835 Head Unit - $549 new. One of the best decks Alpine's made. Check out the EvolutionM review here: https://www.evolutionm.net/forums/sh...d.php?t=101000
SOLD!
26W x 4 V-Drive™ Amplifier
Bass Engine® Pro
- 6-Channel Digital Time Correction
- 6-Position HP/LP Digital Crossover
- 5-Band Parametric EQ
- Subwoofer Level Control with Phase Selector
- 3-Way or 2-Way Digital Crossover
Media Xpander™
SAT Radio Ready
MP3/WMA/CD-R/RW Playback
CD Text and MP3/WMA Tag Informtation Display
2-Line Color Display
Quick Search Function
CD Text, CD Text Display, CD Text Scroll
Versatile-Link™ Ready
MaxTune SQ Tuner
BlackOut Display
Regulated 1Bit DAC
3 PreOuts (4 volt)
iPod™ Interface Ready (KCA-420i)
MM Driver (Hard Disc Drive) Ready
MobileHub™ Ready
i-Personalize
Swing Mechanism with Detachable Face
Two Alpine MRV-T420 2 Channel Amps - $399 new each, asking ONLY $80 each shipped!!
V12 Amplifier
RMS Power Rating:
Per Channel Into a 4-Ohm Load: 110 watts x 2
Per Channel Into a 2-Ohm Load: 170 watts x 2
Bridged Into a 4-ohm Load: 340 watts x 1
STAR Topology: Alpine's unique STAR (Signal Transit for Accurate Response) Circuit PCB design provides a single common ground for all amp sub-blocks, preventing ground interference and minimizing internal noise.
Bass Engine: Bass Engine is a set of functions which help provide you with more control over your system in order to tailor the sound to your personal tastes.
Bass EQ: 0 to 12dB of bass boost, centered at 50Hz, may be dialed-in to produce the bass response desired from your system.
Built-in Variable Electronic Crossover: The built-in high-pass crossover is adjustable from 15 to 400Hz with a slope of 12dB/octave. And, the built-in low-pass crossover is adjustable from 30 to 400Hz with a slope of 12dB/octave.
Protection Circuitry: The protection circuitry guards against accidents and undesired operation. Included are Over-voltage and Thermal overload.
Controls:
Top of Amplifier: The amplifier has a metal hood that flips up to reveal the control panel. The control panel consists of the following controls:
Variable gain controls: these rotary controls allow you to match the input sensitivity of the amp to the particular source unit you are using
High-pass frequency control: this rotary control allows you to adjust the high-pass crossover frequency from 15Hz to 400Hz
Low-pass frequency control: this rotary control allows you to adjust the low-pass crossover frequency from 30Hz to 400Hz
High-pass and low-pass crossover mode selector switches: these switches allow you to select ON or OFF for the speaker outputs
Bass EQ: This rotary control allows you to adjust the boost or cut from 0 to 12dB.
Inputs and Outputs:
Battery (+12 V): gold-plated screw terminal that will accept up to 8-gauge wire or a spade up to 0.355" wide
Remote (turn-on): gold-plated screw terminal that will accept up to 8-gauge wire or a spade up to 0.355" wide
GND (ground): gold-plated screw terminal that will accept up to 8-gauge wire or a spade up to 0.355" wide
Speaker Output: 0.332" wide gold-plated terminal strips for channels 1-4
RCA Input: two sets of gold-plated RCA line input jacks
detachable front cover
blue power LED
12-7/16"W x 2-3/8"H x 11-13/16"D (depth is 10" with front cover removed)
Alpine MRD-M501 Mono Amp - $499 new, asking ONLY $110 shipped!!
V12 Amplifier
RMS Power Rating:
275 watts RMS x 1 at 4 ohms (CEA-2006 Compliant)
550 watts RMS x 1 at 2 ohms
2-Ohm Stable
MOSFET power supply and output stages
STAR Topology: Alpine's unique STAR (Signal Transit for Accurate Response) Circuit PCB design provides a single common ground for all amp sub-blocks, preventing ground interference and minimizing internal noise.
Bass Engine® features:
Low-Pass Digital Filter, 30-200 Hz, with a selectable 12 or 24 dB/octave slope
Variable Subsonic Filter (15-50 Hz in 5 Hz steps)
Parametric EQ Variable From 30-160 Hz, 12 dB
Bass Compensator Enhances Low-End Definition
Top-Mounted Digital Control Center w/ Cover
Preamp Outputs
Time Correction: 0-10 milliseconds in 0.1ms steps
Phase Adjustment: 0-180
Turn-On Delay
Extra-Large Gold-Plated Terminals
13-11/16"W x 2-9/16"H x 10-5/8"D
Last edited by evolution_racer; Jan 12, 2007 at 05:23 PM. Reason: Added Pics
Trending Topics
A friend of mine in Cincy needs these amps! I'll see what I can do.
btw...free bump for a good guy with un-frickin-believably clean equipment!!
Thanks again for a good deal on the HU, Jesse.
btw...free bump for a good guy with un-frickin-believably clean equipment!!
Thanks again for a good deal on the HU, Jesse.
