MX41

EDIT!

Now I am thinking about selling BOTH of these subs. Comparable to the Kicker L7's. Two 12" square HiFonics Brutus Subs. Also looking to sell a Pyle Amplifier. Subs and amp for sale seperate or together(either is fine).

One sub was used for about 1 week. Still almost like new! and the other is BRAND SPANKIN' NEW!

Specs on SUBS:

12" 1200W Dual 4-Ohm Illuminated DVC Subwoofer
WRMS: 600-Watts
4-Ohm + 4-Ohm
Fs: 23.43Hz
Qts: 0.488
Vas: 116 Liters
Xmax: 15mm
SPL: 93.77dB @ 2.83v
600-Watts RMS/1200-Watt Maxx/All 12-inch Brutus Subwoofers
Illuminated Brutus Speaker Cone
Huge 100z. Double-Stack Magnet Assembly
2.5-inch 4-Layer Hi-Temp Aluminum Voice-Coils
Woven Glass-Fiber Layered Composite Cone
Integrated One-Piece Spider- Tinsel Lead Design
White Chrome Steel Speaker Frame with Rubber Front Gasket
1" Tall NBR Reinforced Rubber Surround
Rubber Magnet Boot
Ported Nickel Plated Back-Plate for Heat Dispersion
Nickel Plated Push & Insert Terminals
Nomex Spider-Assembly
For Vented And Sealed Enclosure Designs

Asking: 180$ For both subs together

Specs on AMP

1 x 600W RMS @ 4 Ohms
1 x 1800W MAX @ 2 Ohms
1 x 3600W MAX @ 1.3 Ohms
Mono Block Subwoofer Amplifier
1 Ohm Stereo Stable
MOSFET Power Supply
PWM (Pulse-Width-Modulated) System
Double Sided Epoxy PCB Circuit Board
Gold Plated RCA Inputs
Custom Terminal Block for Speaker Connections
Thermal, Overload Short Protection
Variable Low pass Filter (50Hz~150Hz,24dB/Octave)
Variable Subsonic Filter (15Hz~40Hz,24dB/Octave)
Phase Control 0-180 Degree
Remote Bass Level Control (Included)
Input Impedance:10K Ohms
Soft Turn-on/Turn-off
Side Leg Mounting
Red Lighting Illumination
THD: 0.1%.
S/N Ratio: 90dB
Input Sensitivity : 200mV ~8V
Freq. Response : 15Hz ~ 150KHz
Patent Pending
Heavy Duty Power Coated Heatsink
Dimensions : 8.6''(W) x 2.27''(H) x 15''(L)

Asking: 140$ For the amp

MX41

MX41

TT Reduced

MX41

bump need to sell! New info and ITEMS!