Mark this thread as Unsold
FS: OH - Buschur Built 9 Second Car Part Out
Thread Starter
Evolved Member
iTrader: (8)
Joined: Dec 2004
Posts: 1,347
Likes: 0
From: West Chester, OH
FS: OH - Buschur Built 9 Second Car Part Out
I’m switching things up a little bit, so the Evo is getting parted out and put back to stock to be sold.
Pricing does not include the 3% Paypal fees
Pricing does include shipping on most items
Will get pics as needed. Everything is still installed on the car.
-----------------------------------------------------------------------------------------------------------------------------------------
Engine/Drivetrain
Buschur Racing 2.0L Aluminum Rod Longblock - $6,300
- BR Stage 3 Shortblock – GRP Aluminum Rods, 10:1 JE Pistons
- BR Stage 3 head
- BR BF272 cams
- Will make deal if you have a good condition, running stock longblock
Forced Performance HTA Green – $1,600
- Includes Turbo and oil filter housing oil feed line
- Purchased and installed in May 2011
- 3000 miles at most
Exedy Triple Clutch - $1,600
- Clutch is in good condition. Has ~15,000 miles on it.
AEM EMS S1 - $1000
- Does not include MAP or IAT Sensors
Buschur Racing Race FMIC - $575
JimiB Ported Intake Manifold - $300
- Runners are ported and smoothed out
- Throttle body opening is matched for 65mm TB
Buschur Racing 65mm Ported Throttle Body - $325
B&M Short Throw Shifter - $100
Buschur Racing Lower IC Pipe & J-Pipe - SOLD
Buschur Racing Upper IC Pipe - SOLD
- Flanged for Tial BOV
- Has bung for IAT sensor right before the throttle body. Will include a plug for it.
Buschur Racing Catch Can - SOLD
Buschur Racing Turboback - SOLD
- Designed for JDM bumper
- Includes center and rear bullet mufflers
- Includes “gutted” high flow cat and rear straight pipe
- So you can have an assortment of sound levels from quiet to “straight pipe”
Buschur Racing Double Pumper - SOLD
- Includes 2 high capacity Walbro pumps
- Will knock off $125 if you trade your stock housing/pump
Buschur Racing Fuel Rail - SOLD












Pricing does not include the 3% Paypal fees
Pricing does include shipping on most items
Will get pics as needed. Everything is still installed on the car.
-----------------------------------------------------------------------------------------------------------------------------------------
Engine/Drivetrain
Buschur Racing 2.0L Aluminum Rod Longblock - $6,300
- BR Stage 3 Shortblock – GRP Aluminum Rods, 10:1 JE Pistons
- BR Stage 3 head
- BR BF272 cams
- Will make deal if you have a good condition, running stock longblock
Forced Performance HTA Green – $1,600
- Includes Turbo and oil filter housing oil feed line
- Purchased and installed in May 2011
- 3000 miles at most
Exedy Triple Clutch - $1,600
- Clutch is in good condition. Has ~15,000 miles on it.
AEM EMS S1 - $1000
- Does not include MAP or IAT Sensors
Buschur Racing Race FMIC - $575
JimiB Ported Intake Manifold - $300
- Runners are ported and smoothed out
- Throttle body opening is matched for 65mm TB
Buschur Racing 65mm Ported Throttle Body - $325
B&M Short Throw Shifter - $100
Buschur Racing Lower IC Pipe & J-Pipe - SOLD
Buschur Racing Upper IC Pipe - SOLD
- Flanged for Tial BOV
- Has bung for IAT sensor right before the throttle body. Will include a plug for it.
Buschur Racing Catch Can - SOLD
Buschur Racing Turboback - SOLD
- Designed for JDM bumper
- Includes center and rear bullet mufflers
- Includes “gutted” high flow cat and rear straight pipe
- So you can have an assortment of sound levels from quiet to “straight pipe”
Buschur Racing Double Pumper - SOLD
- Includes 2 high capacity Walbro pumps
- Will knock off $125 if you trade your stock housing/pump
Buschur Racing Fuel Rail - SOLD












Last edited by SloRice; Dec 8, 2011 at 07:49 AM.
Thread Starter
Evolved Member
iTrader: (8)
Joined: Dec 2004
Posts: 1,347
Likes: 0
From: West Chester, OH
Link to the dyno info - https://www.evolutionm.net/forums/ev...wild-mild.html
PM'd you about the I/M.
Trending Topics
Thread Starter
Evolved Member
iTrader: (8)
Joined: Dec 2004
Posts: 1,347
Likes: 0
From: West Chester, OH
JimiB is an old school DSM'er. He has a machine shop local to me. He's involved in all sorts of cars from imports to BBC drag cars and everything in between. He's known David Buschur for a long time and have a mutual respect. I have the highest HP HTAGreen Buschur's dyno has seen and did it on JimiB ported intake and exhaust manifolds.
PM'd you on the package deal.
PM'd you on the package deal.




