This is the current forsale post:
https://www.evolutionm.net/forums/sa...verything.html

This is the build post:
https://www.evolutionm.net/forums/pr...tensive-4.html

These are the parts forsale: Build has updated Milage of 1800 Miles - No issues.

I'm possibly considering a full part out of the entire car including shell which runs and drives perfectly. Unfortunately i lost my job and have not been able to recover. Family comes first. If you are interested in any of the parts i'll put your name on a list, parts will be discounted reasonably as they are practically new. I'm always fair with my prices and will be OBO. Feel free to post in the comments if youre interested in any of them. If i get enough interest ill begin the part out at the end of the month.

Thanks everyone!


Location: Cleveland, OH
Shipping: I can help you coordinate drop-off after funds cleared
VIN: JA3AH86C76U047071
Miles: 60,000
Color: Electric Blue (Ultra Rare)
Model: Lancer Evolution IX GSR
Price: $29500 Original asking price was $35k
Contact: PM here, or text to 440-413-76TwoThree
Horsepower: Car is built for over a 1000hp - Currently tuned on e85
Made 600hp @ 31lbs (Mustang Dyno) - Currently on 34lbs (Very mild tune) Current setup could make 700hp

2006 Lancer Evolution IX GSR
Clean Carfax with all VIN tags in place
Interior is Evo 8 in absolute great shape
A/C has been removed (But can be added/nothing is restricted) Heat works great
This build has 1,000 Miles on it and runs perfectly and Tuned on e85 with NO ISSUES at all (Can verify however you wish) $35,000 in Receipts
Brembo’s have been rebuilt with new seals and powdercoated black chrome II
Evo X Powdercoated Gloss Black Wheels Mint shape
Exterior has some dings/flaws/chips
Have factory key and remote
Im sure I'm missing things but this is the bulk of it

Maintenance:
Everything is absolutely brand new with 1,000 Miles on it.
All Engine bolts have been converted to Stainless and Stainless HEX where available
All fluids for break in have been completed and are new including RS master cylinder to delete ABS and Lines
Started re-loom on entire engine harness 75% Complete - Looks stunning
Engine bay has been repainted when build was done
New Starter and Alternator

Interior/Exterior:
New Gloss Black Vortex Generator
Seibon CF Trunk and Hood
Rexpeed CF Sideskirts, Spats, Rear Extensions, JDM Rear Bumper
DoLuck Rare Front CF Lip
AMS CF Shift Knob
Sparco Lap 5 Steering Wheel - NRG 2.5 QR CF - NRG Hub
AEM Digital Boost Gauge
AEM Digital Wideband Gauge (All new 02 senosrs)
AEM Oil Pressure Sensor
Optima Battery 34
SR Billet Battary Tray
Binary Engineering Seat Brackets
All new trunk interior

Engine:
BR 2.0LR w/ BR Baffled Oil Pan 10,500 Rev.
BR Stage 3 Ported head with GSC S2 Billet Cams
L19 Head Stud Kit by ARP 7-bolt Mitsubishi DSM / Evo 8/9 (L19-7B)
Toxic Fab Exhaust Manifold with all ARP Studs
FP Black Turbo
Tial Wastegate and Blowoff Valve
STM Gloss Black Power Stearing Reservoir
STM Basic Engine Oil Cooler Kit
STM Gloss Black UICP Kit Tial & AIT Bung
STM Gloss Black Aluminum Lower Intercooler Pipe for Stock Fram Turbo
STM Carbon Fiber Coil-On-Plug Ignition System
STM Gloss Black Stock Replacement Coolant Overflow Reservoir
STM ABS Delete Kit
STM Gloss Black E85 Basic Fuel Lab FPR Kit
STM Gloss Black Fuel Rail 6AN/8AN
STM Stainless Clutchline Master to Slave
STM Double Pumper Fuel Feed Kit - Vibrant
STM Fuel Return - Vibrant
STM Vented Dipstick
STM EGR Delete - ARP Exhaust Studs/Bolts/Nuts ARP Turbo Flange Stud/Bolts/Nuts
STM SS FP Downpipe with Dump
ETS 3" Wide Intercooler
ETS Exhaust
Mishimoto JDM EVO 4/5/6 Alum Radiator with Mishimoto Hoses
APR Carbon Fiber Radiator Cooling Plate
APR Carbon Fiber Timing Belt Cover
4 Piece "Street" Torque Solutions Motor Mounts
Evo 9 Spoolin Up SD Kit
Dual Aeromotive Stealth 340 Pumps in a custom Hanger with Relay
KNN Filter and Oddball Industries custom piecut intake
Injector Dynamics 2000cc Injectors
All fuel lines have been converted to -AN fittings Dual -6 to single -8 Feed and -6 Return out of Vibrant

Chassis:
Tein Springs
OEM Front Strut Bar powdercoated black
DBA Brake Pads and slotted Rotors
Innovate 6000K 55Watt HIDs
All bulbs have been swapped to LED
Swaybar Blue Color match, Subframe all powdercoated black and rebuilt to look mint

Driveline:
Shep Transmission
Shep Transfercase
AWD Built Rear End
AWD Driveshaft
Exedy Twin HD Clutch with Monoloc
STM Shifter Bushings
ARP Flywheel bolts

Entire build thread can be found here if you would like to see all the pictures of the parts up close:

https://www.evolutionm.net/forums/pr...tensive-4.html

 

Hey sorry to hear about your situation. Im in the market for a clutch ATM so if you plan on parting your car out you can put me down for the exedy twin and ARP flywheel bolts. Thanks

 

Will do Eroximus. I believe i'll be getting a lot of traction on this thread. Stay tuned for updates.

 

Interested in oil pressure gauge and vortex generator. Please PM me

 

sorry to hear been there before :/ interested on the fp stm downpipe, manifold if it fits my fp red on my 8 , turbo intake, mounts , maybe the injectors,

 

This certainly looks like a FS thread. You will need to follow the guidelines please

FS posts on EVOM MUST INCLUDE:
PICTURE OF THE ITEM WITH A SIGN CONTAINING THE DATE AND YOUR EVOM USERNAME.

Thanks,

 

hey man, really sorry to hear about this happening to you. if you wind up following through i would like to know what you would want for the shep transmission. send me a PM. best of luck with your situation

 

Not a FS Thread. This is a FEELER thread on if i'm gonna part out the car if anyone would be interested. I'm not providing pictures or prices on anything until there is enough interested but people also know there are two other threads of my car with pictures and tags of my car with proper qualifications. I'm not breaking any guidelines.

 

Downpipe would fit your red perfect. Intake would as well as you would need the custom intake or have one made because of the manifold.

I'll put you down for everything as interested. Thanks!

 

I'll put you down as interested in the transmission. Its a Built shep trans with ultimate gear ratio, cryotreated gears, and Billet shafts. All the bells and whistles besides i kept the stock final.

 

I'll put you down as interested in the OP Gauge and Generator. Generator is still in the packaging.

 

thx let me know before I order a dp from stm lol

 

Thanks everyone for all the interest in the part out, Looks like this might be happening, i'm working on getting a price list together by the end of the month and pictures of everything individually and if anyone needs anything else please let me know - Mainly i'm looking for someone to purchase the complete longblock as a whole, the Tcase, Radiator, Tial WG/Blowoff, Hood/Trunk/Sideskirts, Steering wheel package. A lot of the other stuff has interested parties but if your interested in anything please post as well as not everyone is 100%.

 

I'd like the Trans of you do decide to part out.

 

I'd like the driver seat if youre selling that