Notices
For Sale/WTB - Engine / Drivetrain / Power Includes exhausts, cams, clutches, flywheels and all other power related components.
Mark this thread as Unsold

F/S 65MM Throttle Body

Thread Tools
 
Search this Thread
 
Old Nov 12, 2006 | 09:13 PM
  #1  
turboDan's Avatar
Thread Starter
Account Disabled
iTrader: (172)
 
Joined: Nov 2003
Posts: 836
Likes: 0
F/S 65MM Throttle Body

F/S, 65mm(bored out) stock throttle body for Evo 8,not sure if same as the IX,would need to check to be sure.This was done by member WOT see here https://www.evolutionm.net/forums/sh...0&page=1&pp=15
Willing to sell out right with no exchange or exchange for your Stock Throttlebody,
up to you.This comes with gasket and has never been used since this service was done.I will sell for a Loss, either $320.00 outright,shipping and paypal included OR
$215.00 on an exchange basis,also with paypal and shipping included.
This is a DEAL considering the top shops charge $300.00 and up on an exchange basis, and this unit can be purchased outright for just a few $$$$ more.
Here is what one Reputable performance shop that does these have to say and have the facts to back it up http://www.worksevo.com/store/produc...roducts_id=117
Also,from what I posted above,according to their website it DOES fit the Evo IX as well as the Evo VIII
SOLD!!!!!!!!

Last edited by turboDan; Nov 21, 2006 at 10:33 AM.
Old Nov 13, 2006 | 06:47 AM
  #2  
MitsuJoe's Avatar
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
Please e-mail me pictures to joeamartin@gmail.com
Thanks!
Old Nov 13, 2006 | 02:09 PM
  #3  
turboDan's Avatar
Thread Starter
Account Disabled
iTrader: (172)
 
Joined: Nov 2003
Posts: 836
Likes: 0
Will take pic's tonight if needed but it is going to look just like the one in the Link posted above.All P.M's replied to but no $$$ has yet been exchanged.
Old Nov 13, 2006 | 03:08 PM
  #4  
MitsuJoe's Avatar
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
I was looking for pictures that mate to the TB, the back side.
Old Nov 13, 2006 | 10:26 PM
  #5  
turboDan's Avatar
Thread Starter
Account Disabled
iTrader: (172)
 
Joined: Nov 2003
Posts: 836
Likes: 0
Originally Posted by Joe's_EVO8
I was looking for pictures that mate to the TB, the back side.
Not too sure I understand what you are requesting,you mean the side that mates to the Manifold?,not like seen in this picture https://secure.buschurracing.com/cat...d56006f51815b8
BTW,notice as posted in link above that the stock Throttle body is capable of 9 second 1/4 mile passes.
Old Nov 13, 2006 | 10:27 PM
  #6  
kimletrim's Avatar
Registered User
iTrader: (18)
 
Joined: Nov 2003
Posts: 1,131
Likes: 0
From: indi
Why are you selling?
Old Nov 13, 2006 | 10:38 PM
  #7  
turboDan's Avatar
Thread Starter
Account Disabled
iTrader: (172)
 
Joined: Nov 2003
Posts: 836
Likes: 0
Originally Posted by kimletrim
Why are you selling?
Going BIGGER ,the T-Body being ONLY 65mm was going to be the Bottleneck in my set-up (3" I/C piping into the VSR intake was being reduced only at the T-Body.
Sadly I never used this t-body since I Purchased it off Abby.Even took this home with me from a Vacation to Sunny SoCal after meeting Abby on the side of the I-5 to swap my stocker for this one.
Old Nov 14, 2006 | 07:06 AM
  #8  
MitsuJoe's Avatar
Former Sponsor
iTrader: (133)
 
Joined: Dec 2003
Posts: 3,123
Likes: 0
From: Anywhere
Yes, the side that mates the intake manifold.

If I do an exchange will you ship this first and give a few days for the swap?
Old Nov 14, 2006 | 03:01 PM
  #9  
turboDan's Avatar
Thread Starter
Account Disabled
iTrader: (172)
 
Joined: Nov 2003
Posts: 836
Likes: 0
Originally Posted by Joe's_EVO8
If I do an exchange will you ship this first and give a few days for the swap?
Yes,no problem.Just paypal me the price for the Throttle body and paypal me a
seperate paypal for $100.00(to guarantee that I get your throttle body back) and when I recieve your Throttle body in Good Useable Condition I will refund you your $100.00 and no paypal fee will be imposed and you will get your full $100.00 back.
Old Nov 15, 2006 | 03:45 AM
  #10  
turboDan's Avatar
Thread Starter
Account Disabled
iTrader: (172)
 
Joined: Nov 2003
Posts: 836
Likes: 0
ttt
Old Nov 15, 2006 | 04:36 PM
  #11  
turboDan's Avatar
Thread Starter
Account Disabled
iTrader: (172)
 
Joined: Nov 2003
Posts: 836
Likes: 0
Man,I have gotten a TON of P.M's on this and yet it is still F/S.Price is FIRM,thanks.
Better price than ANYONE is selling these for,by alot...
Old Nov 16, 2006 | 02:22 PM
  #12  
turboDan's Avatar
Thread Starter
Account Disabled
iTrader: (172)
 
Joined: Nov 2003
Posts: 836
Likes: 0
To The Top.
Old Nov 16, 2006 | 06:30 PM
  #13  
thebluesky's Avatar
Evolved Member
20 Year Member
Photogenic
iTrader: (28)
 
Joined: Aug 2004
Posts: 542
Likes: 6
From: Colorado
Where are you located?
Old Nov 16, 2006 | 07:37 PM
  #14  
turboDan's Avatar
Thread Starter
Account Disabled
iTrader: (172)
 
Joined: Nov 2003
Posts: 836
Likes: 0
Originally Posted by thebluesky
Where are you located?
Connecticut ^^^^^^^^^^^^^^^^^^^^^
Old Nov 17, 2006 | 12:15 PM
  #15  
Aby@MIL.SPEC's Avatar
Former Sponsor
iTrader: (161)
 
Joined: Jun 2003
Posts: 3,043
Likes: 13
From: San Elijo Hills, Ca.
Bump 4 a good guy.

I cant believe you havent sold this outright???

Buying this outright is cheaper than buying from 2 other vendors with exchange!!

BTW, the other 2 vendors charge you for a 65mm oem gasket!!!

Good luck on the sale dan



All times are GMT -7. The time now is 03:03 PM.