Like the title says this a pretty much a new Meth kit. I bought this a few months ago and recently installed it. My next step was to get the full zietronix kit from TPP for the fail safe and run meth every day. However my wife drives my car too much on the weekends and I can't trust her to check the meth bottle while she is out and potentially blow the motor.

It comes with everything except the activation LED. I will see if I can find one at radio shack.
The TTP kit uses the windshield washer resivoir but I am using a 3/4 gallon tank which will be included. I ran 1 tank of water and 1 tank of windshield washer fluid through this kit.

SOLD!!!!!!!!!!!!!!!!!!!! TO ewoevo



Below is the info from the TTP site.
Get a complete kit that is tested and proven on the shop Evo MR to 405+whp & 445.1tq!
Compatible with methanol!

This kit includes the following:
* High pressure 150 psi diaphragm pump with viton valves.
* Easy install Injector nozzle - pre-assembled!
* 20ft (trunk option) High Pressure Blue Nylon 11 tubing
* Variable injection module
* Instant On fittings for Pump, and Misting Nozzle.
* 20ft (trunk) - 10 guage copper wire, for pump
* 20ft of 18 guage copper wire - for other electrical
* Various crimp terminals for wire hookups
* Easy to follow instructions


Requires simple tools for installation -
* 1/8NPT tap and drill
* crimp, cut and strip wire tool
* teflon tape or pipe dope
* adjustable wrench
* flat blade screwdriver
* Reservoir. Or tap into existing windshield washer tank.


If doing an under hood pump install, utilizing the existing washer fluid reservoir makes installation simplified. The advantage of a trunk mounted pump/res install is cooler fluid temps. The 1 or 2 quart containers that come with some competitor models are far too small. Our observation is a minimum of 1-2 gallons for our own driving with 500hp.

 

New price after doing some research. I do take paypal as well.

 

I will take trades for larger injectors, PM me to work something out.

 

What size injectors are you looking for? Also, which part of FL is Riverview located?

 

680's to 880's will work.
I also now have a new LED activation light for the kit.

Riverview is 45 mins south of Tampa.

This kit retails for $429!!!

 

OK, well I have a set of FIC 1,000cc injectors. LMK if you're interested.

 

What condition are they in?
Do you have the flow sheets for them?
Are they new?

Please give me all the info you have on them.
I see you bought them on the board but there is no info.

 

Good seller you can trust.

 

If you have any questions please let me know.

 

They are slightly used. I bought them on here, but haven't installed them yet. I don't have the flow sheets for them. They look to be in pretty good shape, though.

 

This is the lastest version kit we have to offer.

It is more advanced than the non-progressive kit we used on our 10 sec runs and uses the same 15gph jet for maximum flow volume.

 

Can you explain whats so advanced about the newer kit?

 

Programmable progressive controller, variable injection speed and volume as boost goes up. Programmable spray on point and max duty cycle point.