Mark this thread as Unsold
FS: Tactrix Cable, Eagle Rods, BR JE pistons and SW gauges.....
Thread Starter
Evolved Member
iTrader: (13)
Joined: Jan 2006
Posts: 2,916
Likes: 1
From: Las Vegas and HATING it
FS: Tactrix Cable, Exedy, SW gauges.....
I have somethings I gotta sell....
Tactrix Cable $80 shipped, the cable is at Buschur Racing. Its in my car and they have the engine out. Give them a call if you want it. I am sure Nick or JaRRod can take your CC# and get it out and ship it to ya
Let me check on that tommarrow for you
I also have an Exedy stage 2 clutch DISC only that is taking up space in my garage. You could proly use a stock pressure plate with it... not sure though. Its worn about 10% at the most. I will get pics up tommarrow. $50 shipped.
I have 3 Stewart Warner Gauges. 40psi Boost, 100psi fuel pressure, and 100psi oil pressure. They are in Autometer boxes cause it was all I had to put them in from when I did gauges in my GTi
Also with the gauges I have orange LED's that match the stock lighting in the insturment panal. There is alot of misc sh*t.... brackets, hose, instructions, and the oil fitting adaptor for the gauge that goes on the filter housing. Everything was bought from 42 draft design.
You will need to buy 1 new sending unit for one of the gauges. Last I checked they where $30.
Looking for $100 shpped
Tactrix Cable $80 shipped, the cable is at Buschur Racing. Its in my car and they have the engine out. Give them a call if you want it. I am sure Nick or JaRRod can take your CC# and get it out and ship it to ya
Let me check on that tommarrow for you I also have an Exedy stage 2 clutch DISC only that is taking up space in my garage. You could proly use a stock pressure plate with it... not sure though. Its worn about 10% at the most. I will get pics up tommarrow. $50 shipped.
I have 3 Stewart Warner Gauges. 40psi Boost, 100psi fuel pressure, and 100psi oil pressure. They are in Autometer boxes cause it was all I had to put them in from when I did gauges in my GTi
Also with the gauges I have orange LED's that match the stock lighting in the insturment panal. There is alot of misc sh*t.... brackets, hose, instructions, and the oil fitting adaptor for the gauge that goes on the filter housing. Everything was bought from 42 draft design.
You will need to buy 1 new sending unit for one of the gauges. Last I checked they where $30.
Looking for $100 shpped
Last edited by vwjeff; Mar 19, 2008 at 07:12 PM.
Thread Starter
Evolved Member
iTrader: (13)
Joined: Jan 2006
Posts: 2,916
Likes: 1
From: Las Vegas and HATING it
Trending Topics
Thread Starter
Evolved Member
iTrader: (13)
Joined: Jan 2006
Posts: 2,916
Likes: 1
From: Las Vegas and HATING it
ok just to clarify here, I dunno the milage on the rods and pistons. there is minor scuffing on the skirts.
when I get home tonight I will post up pics, I can't do it from my phone.
when I get home tonight I will post up pics, I can't do it from my phone.
