Mark this thread as Unsold
Fund my rebuild SALE [please :)]
Thread Starter
Evolved Member
iTrader: (30)
Joined: Nov 2003
Posts: 606
Likes: 0
From: Warrington, PA
Fund my rebuild SALE [please :)]
The car has been down for about 3 weeks now and I miss it bad!! Help me get this rebuild done by buying some of these parts that are either NEW or almost new. Thanks for your help guys!!
PAYPAL ACCEPTED!
1.
BRAND NEW in bag, JM Fabrications DRAG sheetmetal intake manifold flanged for the stock Evo TB bolt pattern. The manifold is polished and has an OEM MAP sensor provision. Also comes with the dipstick and fuel rail mounting hardware. New it would cost you $850 plus shipping. Buy it now for $575 shipped!! ***SOLD***
2.
BRAND NEW in box, billet 70mm throttle body w/ stock Evo TB bolt pattern. Will work PERFECTLY for the manifold above or your stock Evo intake manifold. The throttle body has provisions for the stock TPS and ISC!!!! VERY uncommon for a larger aftermarket TB! I paid over $500 shipped for this piece!! Yours for $295 shipped!! ****SOLD****
3.
Stock unported Evo IX intake manifold. Took it off my car at 19k miles. Comes with everything in picture. $195 shipped
4.
JM Fabrications heat shield (for stock Evo 8/9 manifold). This was on my car for about 4k miles. $45 shipped ********SOLD*******
6.
JM Fabrications CNC'd COP plate. This piece is NEW and was the prototype. Yours for $75 shipped. *******SOLD*******
7.
Misc AN line and fittings. Would rather sell together to make it worth my time. Includes the following-
*3ft of -6AN line
*7ft section of -8AN line
*18ft section of -8AN line
*-10AN 45* pushloc shadow series fitting
*TWO -6AN 45* fittings
*-6AN straight fitting
*-6AN straight pushloc fitting
*-6AN 45* pushloc fitting
Roughly close to $200 in lines and fittings. Yours for $50 shipped. ***SOLD*****
8.
Used Compaq laptop. I used to use this laptop for logging...great for DSM Link, AEM, etc. Has serial cable connection on back. AMD K6 processor w/ 60 megs of RAM. Battery held charge for about 20-30 minutes. $60 shipped. ***SOLD***
PAYPAL ACCEPTED!
1.
BRAND NEW in bag, JM Fabrications DRAG sheetmetal intake manifold flanged for the stock Evo TB bolt pattern. The manifold is polished and has an OEM MAP sensor provision. Also comes with the dipstick and fuel rail mounting hardware. New it would cost you $850 plus shipping. Buy it now for $575 shipped!! ***SOLD***
2.
BRAND NEW in box, billet 70mm throttle body w/ stock Evo TB bolt pattern. Will work PERFECTLY for the manifold above or your stock Evo intake manifold. The throttle body has provisions for the stock TPS and ISC!!!! VERY uncommon for a larger aftermarket TB! I paid over $500 shipped for this piece!! Yours for $295 shipped!! ****SOLD****
3.
Stock unported Evo IX intake manifold. Took it off my car at 19k miles. Comes with everything in picture. $195 shipped
4.
JM Fabrications heat shield (for stock Evo 8/9 manifold). This was on my car for about 4k miles. $45 shipped ********SOLD*******
6.
JM Fabrications CNC'd COP plate. This piece is NEW and was the prototype. Yours for $75 shipped. *******SOLD*******
7.
Misc AN line and fittings. Would rather sell together to make it worth my time. Includes the following-
*3ft of -6AN line
*7ft section of -8AN line
*18ft section of -8AN line
*-10AN 45* pushloc shadow series fitting
*TWO -6AN 45* fittings
*-6AN straight fitting
*-6AN straight pushloc fitting
*-6AN 45* pushloc fitting
Roughly close to $200 in lines and fittings. Yours for $50 shipped. ***SOLD*****
8.
Used Compaq laptop. I used to use this laptop for logging...great for DSM Link, AEM, etc. Has serial cable connection on back. AMD K6 processor w/ 60 megs of RAM. Battery held charge for about 20-30 minutes. $60 shipped. ***SOLD***
Last edited by 11secDSM; Sep 15, 2008 at 04:48 PM.
