Mark this thread as Unsold
BR Spec Je pistons & Carrillo Rods FS
BR Spec Je pistons & Carrillo Rods FS
These are BNIB never installed or used BR Spec Je Pistons for 2.0L .020" over with the Total Seal piston rings and BNIB Carrillo rods.
The Carrillo rods are distributed by JE (hence the JE packaging but note the Carrillo spec sheet)
Looking to get $1200.00 for the full set. Open to trades...send PM
I purchased these as spares as I have a spare block (make and offer
) and a freshly rebuilt head (again..make an offer) but I am looking to get a job in the Virgin Islands and will most likely not have a garage anymore. So why sit on parts I dont need?
The Carrillo rods are distributed by JE (hence the JE packaging but note the Carrillo spec sheet)
Looking to get $1200.00 for the full set. Open to trades...send PM
I purchased these as spares as I have a spare block (make and offer
) and a freshly rebuilt head (again..make an offer) but I am looking to get a job in the Virgin Islands and will most likely not have a garage anymore. So why sit on parts I dont need?
Last edited by althemean; Jan 24, 2009 at 09:36 AM.
Which Carrillo's are those? 518 grams is pretty light. They look similar to the Carrillo A-beams. The Carrillo A-beams are only rated to around 400hp. The 518 weight is in between the 509 gram A-beam weight and the S-A beam rod 531 gram weight.
While nice rods, I don't think those are for bigger hp applications.
Bump for you
While nice rods, I don't think those are for bigger hp applications.
Bump for you
Trending Topics
These are the A-beam rods with 3/8 bolts. I would agree they are not meant for 1000hp applications. But thats the price difference between h-beam and A-beam. They are a good choice to be paired with the JE pistons and will offer a nice light weight assembly.
Link to the page I purchased them from years ago....
http://www.slowboyracing.com/sbs/sbr...at=1824&page=1
Link to the page I purchased them from years ago....
http://www.slowboyracing.com/sbs/sbr...at=1824&page=1