I have a new innovate lm-1 basic kit for sale (3723). I would like 250 plus actual shipping cost. If you have any questions please do not hesitate to pm me. Thanks




Description from innovate:

Tuning an engine for maximum power previously required long trial-and-error sessions on a dynamometer. With the LM-1, precise AFR measurement allows the user to correctly adjust many variables- including carburetor jetting, fuel injection, turbo fuel curves, etc.- without long and expensive dyno sessions. The meter s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-1 s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

The instrument can sample and store the air-fuel-ratio and the other sensor data internally in operation for later analysis on a personal computer. At a sampling rate of 12 samples/second the instrument can store up to 44 minutes worth of data in non-volatile memory. The data can be downloaded to a personal computer using a standard serial port and viewed/analyzed by the included software or any standard spreadsheet program:

The standard LM-1 includes a Bosch wide-band oxygen sensor and cable, cigarette-lighter adapter, serial cable for PC connection, 9V battery, exhaust bung and plug, CD and manual. The LM-1 ships with a Bosch sensor, however, it can also function with other wide-band sensors, including Honda/NTK and VW sensors.

 

Blue or Red light gauge?

 

Im pretty sure it is green. This kit doesnt come with a gauge, it is a controller/gauge. It reads afr but you record pulls. You can transfer data to a lap top and see afrs through the rpm and loads. This is a better kit that the 3796 or 3795 widebands. It retails for 320 avg and at 250 it is more than a deal.

 

i was about to buy this but i want the guage i dont need to be using any labtops thats what tuners are for i want the guage right there so i can look up and see where the afrs are dang man and i been waiting for somebody to sell a freaking innovate wideband guage kit looks like i might have to buy it new guezz

 

This is new lol. It displays afr just like the gauge does except this does more just not in the shape of a 52mm circle. This makes it easier on your tuner. They can plug in and view the afr plot. It is always nice to have the option even if you dont think you will use it. You will definatly be satisfied with the kit.

 

bump

 

but with the reg one with guage they can do the same thing according to mellon thats why he wants me to get one. so i need to guage so i can see afr at all times kind of defeats the purpose if im not a turner and i can keep a constant eye on the afr guage

 

This does display the afr at all times. You can add a gauge to this if you want a circle gauge, they even have square ones. What Im saying is it is always nice to have the option to get a plot of afr through the rpm range. If something happens and have a problem you can upload the map and post on the forum and get free tuning advice by pros.

 

new price 230!!!!

 

215 shipped!!! Need it gone!

 

ok how much for the circle guage i can fit into 52mm apiller then hommie. how come i never heard of this one that you can add a guage to. Period im sending this sale thread to mellon see what he says about it.

http://tunertools.com/proddetail.asp?prod=IN-3795

here one i was about to cop.

 

You can get a square display or the 52mm gauge for 60 bux on ebay or your local dealer/distributor for around 70-80 bux.

 

point me in the right direction for a guage

 

square display
http://cgi.ebay.com/ebaymotors/Innov...item5ad5d5f2ec


Innovate 52mm
http://www.innovatemotorsports.com/x...cat=250&page=1

It is 99 bux straight from innovate. As I said before the gauge can be purchased for 70-80 online. (titan motorsports, tunertools,slowboy ect.)

 

bump