Mark this thread as Unsold
FS: Custom COP Ignition
FS: Custom COP Ignition
SOLD!
All,
I have for sale a Custom COP made of the following:
1. AEM Twin Fire 4 channel
2. 300m Coils
3. 300m Coil Plugs
4. HKS Harness plugs for a no cutting and plug-n-play installation
5. Wrinkle Black Plate that will fit Evo VIII-IX.
6. Hex head black bolts for the 4 coils and the corners for a classy look.
This will work with stock or aftermarket ECU and it is guaranteed to be plug-n-play. The TwinFire just came back from an upgrade in board/component revision and it should be like new as they replaced all the internals and the outer case. They only left the side plate as this is where the serial label goes. :-) I have a very good friend at AEM.
Note: I recommend to have someone knowledgeable to install this as this is a high voltage system. Also, this can also be wired to be used with four triggers. This is for people using aftermarket ECUs.
I am asking 525.00 for it shipped, insured and delivery confirmation.
Pics:
Plate
TwinFire
TwinFire-to-Plate Connector
OEM Ignition Plug Connectors (This were taken off an HKS harness)
Additional bolts for the plate corners
AEM Document after the upgrade.
If interested, please reply here or PM me.
Thanks for looking!
All,
I have for sale a Custom COP made of the following:
1. AEM Twin Fire 4 channel
2. 300m Coils
3. 300m Coil Plugs
4. HKS Harness plugs for a no cutting and plug-n-play installation
5. Wrinkle Black Plate that will fit Evo VIII-IX.
6. Hex head black bolts for the 4 coils and the corners for a classy look.
This will work with stock or aftermarket ECU and it is guaranteed to be plug-n-play. The TwinFire just came back from an upgrade in board/component revision and it should be like new as they replaced all the internals and the outer case. They only left the side plate as this is where the serial label goes. :-) I have a very good friend at AEM.
Note: I recommend to have someone knowledgeable to install this as this is a high voltage system. Also, this can also be wired to be used with four triggers. This is for people using aftermarket ECUs.
I am asking 525.00 for it shipped, insured and delivery confirmation.
Pics:
Plate
TwinFire
TwinFire-to-Plate Connector
OEM Ignition Plug Connectors (This were taken off an HKS harness)
Additional bolts for the plate corners
AEM Document after the upgrade.
If interested, please reply here or PM me.
Thanks for looking!
Last edited by joedr; May 17, 2010 at 07:52 PM.
There has been three people interested on the COP and one willing to pay in a few hours.
Here is my Paypal Address: joed.rodriguez@gmail.com
First one to drop payment gets it! :-)
Here is my Paypal Address: joed.rodriguez@gmail.com
First one to drop payment gets it! :-)
Trending Topics
I called you two times and since you told me that was your last day in the island I thought you got caught up with family matters. I did not want to bother on your trip.
If you are still interested PM me or call me and will work something out for my fault.
If you are still interested PM me or call me and will work something out for my fault.
