please delete.

 

Pretty interested... but I haven't seen many people mixing cam durations on the IX.

Would this set be too aggressive for a HTA Green + bolt ons?

 

I think your bottom end may suffer a little bit, but topend might be better than some other cams. The cams worked really well. They are essentially the same advertised numbers as the Cossie M3 cams, but still not as aggressive as a ramp rate, so they are much more streetable. I've seen M3's on stock turbo cars pushing 30psi make good power. So I think your setup would work just fine with these. Just comes down to preference.

 

bump...price listed is obo

 

new cores?

 

As far as I was told they were brand new. I bought them brand new as a new set, not a regrind!

 

oh ok, if you take them out can u get me some pics of the intake cam? by the oil grooves.

 

not planning to take them out unless they are sold. they have less than 1200 miles on them. the was run on 20w50 for break in mileage up until about 900-1000 miles and then mobil 1 10w30 for the last couple hundred. if they have any issues when removed, they will be addressed at that time. but there were no issues I physically saw when i pulled my valve cover to paint it. they looked to be in perfect condition.