Mark this thread as Unsold
Complete Fully-Built 2.4L 4G63 4G64 Evo 8 Motor Engine Longblock
Complete Fully-Built 2.4L 4G63 4G64 Evo 8 Motor Engine Longblock
SOLD!!!!!!!!!
There are exactly 3,237 miles on this motor. It was properly broken in and is in perfect condition. It was built by Lenworth Barnett of Speed Injected in Florida. It has Wiseco pistons (.20 over) and Pauter rods and a Cometic head gasket that has the gas-filled rings around each cylinder to ensure a complete seal. The whole engine (internals and external) was cryogenically treated at 300below in Chicago. The head is fully ported and polished by Steven Wright of WrightTouch Automotive and it has a 3-angle valve job, there are very few heads on the market that flow like this one! The full valvetrain is Ferrea/Rev Engineering. The cam gears are HKS Duralium, the intake/exhaust camshafts are HKS 280/280. It has the evo oil pan on the 2.4 block. It has Clevite Crush Washers and the AMS Balance shaft eliminator kit. It has the ARP Head Studs and ARP Connecting Rod Bolts. It also has the Zaklee Clear Cam Gear Cover. It's the full long block, from the magnesium valve cover to the oil pan. Compression is 9:1
This engine is built to withstand 1000hp. This engine is in meticulously perfect working condition, WE GUARANTEE IT! If you purchase this engine from us and it is not functioning properly (must be engine related and not because of your fuel system setup) we will refund your complete purchase price back to you. Our 100% feedback and power-seller status should speak for itself.
For domestic shipping, we will crate and ship this engine to you via Truck Freight for free!
For International shipping, we will ship this crated engine to the freight forwarder of your choice within the Continental USA for free. You must make the necessary arrangements with your freight forwarder to have the shipment delivered to your destination and all duties and taxes are your responsibility.
There are exactly 3,237 miles on this motor. It was properly broken in and is in perfect condition. It was built by Lenworth Barnett of Speed Injected in Florida. It has Wiseco pistons (.20 over) and Pauter rods and a Cometic head gasket that has the gas-filled rings around each cylinder to ensure a complete seal. The whole engine (internals and external) was cryogenically treated at 300below in Chicago. The head is fully ported and polished by Steven Wright of WrightTouch Automotive and it has a 3-angle valve job, there are very few heads on the market that flow like this one! The full valvetrain is Ferrea/Rev Engineering. The cam gears are HKS Duralium, the intake/exhaust camshafts are HKS 280/280. It has the evo oil pan on the 2.4 block. It has Clevite Crush Washers and the AMS Balance shaft eliminator kit. It has the ARP Head Studs and ARP Connecting Rod Bolts. It also has the Zaklee Clear Cam Gear Cover. It's the full long block, from the magnesium valve cover to the oil pan. Compression is 9:1
This engine is built to withstand 1000hp. This engine is in meticulously perfect working condition, WE GUARANTEE IT! If you purchase this engine from us and it is not functioning properly (must be engine related and not because of your fuel system setup) we will refund your complete purchase price back to you. Our 100% feedback and power-seller status should speak for itself.
For domestic shipping, we will crate and ship this engine to you via Truck Freight for free!
For International shipping, we will ship this crated engine to the freight forwarder of your choice within the Continental USA for free. You must make the necessary arrangements with your freight forwarder to have the shipment delivered to your destination and all duties and taxes are your responsibility.
Last edited by gtlimer; Jul 22, 2011 at 01:51 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lily03
Other Cars - For Sale - Wanting To Buy (WTB) Or Trade (WTT)
1
Jan 17, 2012 12:40 PM
gtlimer
For Sale/WTB - Engine / Drivetrain / Power
12
Jul 21, 2011 06:43 AM
PainInMySide
Evo Electrical / Audio / Security
15
Nov 5, 2010 05:03 PM
