Clutch sold! Post #2 is the turbo

 

Pending sale on turbo

 

Pics updated, thread unlocked!

 

What's the difference between the BBK-B and Full?

 

The B flows around 60lb/min and the Full about 50 lb/min if I remember correctly

 

B spools a little bit later than the full, has slightly less transient response and also needs > 30 PSI to get the most out of it.

GLWS OP!

 

Ok thanks for the info! Bump for you!

 

Bumpski

 

bump

 

Bump

 

Lowered the price on the turbo

 

Ttt

 

So to run a bbk-b you need more than 30 psi? And the BBK Full ported shows 49lb/min...

 

No, you can run it lower, I ran mine from 25-29psi 98% of the time.

It pulls away from the BBK Full above 30psi, Thats where it starts to make really good power. Below that, they're pretty close, minus the spool is a little quicker on the Full, But, thats due to it being a smaller turbo.

This turbo is "basically (as in Flow/spool)" like the FP Red, without the Surge Cover.

 

Bump