Mark this thread as Sold
FS: 3" Aluminum exhaust - stainless dp with v band. Weighs 10lbs!
#1
Evolved Member
Thread Starter
iTrader: (65)
Join Date: Oct 2007
Location: New Oxford, Pa
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
FS: 3" Aluminum exhaust - stainless dp with v band. Weighs 10lbs!
Custom 3" aluminum exhaust and stainless down pipe with v-band connection. Cat back section weighs in at 10 lbs!
Built this for my track car to save as much weight as possible. Car is going back to stock as the car is for sale. Was on the car for less then 350 miles.
System utilizes a 3" stainless downpipe that terminates with a v band right behind the crossmember, this is where the aluminum exhaust starts. Made to be as light as possible, I've eliminated the "test pipe" section further saving weight. Exhaust has 1 aluminum o2 bung. Vibrant 3" muffler with a custom 3" to 4" tip that sets this off from any other aluminum exhaust I have seen.
Since the rear section is 1 piece, probably be best to pick it up or I will meet you.
Asking $500 picked up.. This is a full turbo back system.
Willing to ship at your expense, exhaust will have to be cut in half.
Thank you
Grant
717-451-9204
Built this for my track car to save as much weight as possible. Car is going back to stock as the car is for sale. Was on the car for less then 350 miles.
System utilizes a 3" stainless downpipe that terminates with a v band right behind the crossmember, this is where the aluminum exhaust starts. Made to be as light as possible, I've eliminated the "test pipe" section further saving weight. Exhaust has 1 aluminum o2 bung. Vibrant 3" muffler with a custom 3" to 4" tip that sets this off from any other aluminum exhaust I have seen.
Since the rear section is 1 piece, probably be best to pick it up or I will meet you.
Asking $500 picked up.. This is a full turbo back system.
Willing to ship at your expense, exhaust will have to be cut in half.
Thank you
Grant
717-451-9204
Last edited by boosted91t; Jul 10, 2012 at 01:16 PM. Reason: Price drop again
#7
Evolved Member
Thread Starter
iTrader: (65)
Join Date: Oct 2007
Location: New Oxford, Pa
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
Cody - shoot me a pm later to remind me I'll get you a link
Igo4bmx - It's a different tone then a stainless exhaust, really neat sound. Not any louder then the other 3" stainless systems on the market. I lean towards the aluminum absorbing alot of sound as well
Igo4bmx - It's a different tone then a stainless exhaust, really neat sound. Not any louder then the other 3" stainless systems on the market. I lean towards the aluminum absorbing alot of sound as well
Trending Topics
#10
Evolved Member
Thread Starter
iTrader: (65)
Join Date: Oct 2007
Location: New Oxford, Pa
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
What power are you making that you need a 4" system? I see a bbk in your avatar
http://youtu.be/B-vkIEdO5fw
http://youtu.be/B-vkIEdO5fw
#14
Evolved Member
iTrader: (4)
Join Date: Jun 2008
Location: Philly Burbs
Posts: 945
Likes: 0
Received 0 Likes
on
0 Posts
nice looking exhaust. i have been thinking about changing up my exhaust since the car is in the body shop getting fixed due to some dumbass hit and run driver. currently have a hks hi power that sounds nice, good low grumble to it, but am looking to go louder. of course buschur bullet is nice, but $$$.
hard to tell the sound from a drag race when going full bore. could you give any more info (your opinion) about sound while on the highway, normal drive, WOT, and idle?
long shot, but any clips of the car idling/revving while sitting? what was your reason for going custom exhaust?
I prefer custom pieces to off the shelf, so this has peaked my interest especially since your in PA. only need the cat back section, assume it bolts right up to a DC sports 2 in 1 DP ?
looking for good, LOUD sound but not raspy civic sounding exhaust.
regardless, bump for you and the creativity behind the exhaust. if this doesnt work out, maybe JMF can fab me up something good.
glws bro! if you are interested in trades for my hks lmk, no need for 2 exhausts and hate dealing with evom lowballers as im sure you know.
cheers
hard to tell the sound from a drag race when going full bore. could you give any more info (your opinion) about sound while on the highway, normal drive, WOT, and idle?
long shot, but any clips of the car idling/revving while sitting? what was your reason for going custom exhaust?
I prefer custom pieces to off the shelf, so this has peaked my interest especially since your in PA. only need the cat back section, assume it bolts right up to a DC sports 2 in 1 DP ?
looking for good, LOUD sound but not raspy civic sounding exhaust.
regardless, bump for you and the creativity behind the exhaust. if this doesnt work out, maybe JMF can fab me up something good.
glws bro! if you are interested in trades for my hks lmk, no need for 2 exhausts and hate dealing with evom lowballers as im sure you know.
cheers