Mark this thread as Unsold
F/S (MD) Precision 1200cc Injectors
Thread Starter
Joined: Aug 2010
Posts: 574
Likes: 18
From: Silver Spring, MD
F/S (MD) Precision 1200cc Injectors
sold
Precision 1200cc Injectors $265 shipped.
I just had these serviced and they are ready to go.
So I've been getting this question a few times and figured I'd just post the info to help aid potential buyers in their decision making process. Buying used injectors can be a crap shoot. Sometimes they're in great condition and will run perfectly, Sometimes they're not flowing evenly and can potentially cause a lot of damage to your engine.
The prudent thing to do when purchasing used injectors is to send them in to the manufacturer to ensure they're in perfect working order.
Let's use these as an example. I purchased these from a member on this board. As the flow sheet shows there is a 42% variance between the highest flowing injector and the lowest. If I had taken it on good faith that they were in perfect working order, not only would I have had a set of injectors that were flowing below what I expected. I likely would've been very lean in one or two cylinders and destroyed my motor.
In my case, I'm unwilling to sell something that isn't a known and functioning commodity, so I had them flow tested, cleaned and serviced. Service cost through PTE is $15 per injector plus shipping both ways (about $25). Because the body of the injector sees no actual wear and because the internal components can so readily be replaced, once serviced, injectors will be functioning as new and can be used without a second thought.
I hope this helps to answer some questions.
Precision 1200cc Injectors $265 shipped.
I just had these serviced and they are ready to go.
So I've been getting this question a few times and figured I'd just post the info to help aid potential buyers in their decision making process. Buying used injectors can be a crap shoot. Sometimes they're in great condition and will run perfectly, Sometimes they're not flowing evenly and can potentially cause a lot of damage to your engine.
The prudent thing to do when purchasing used injectors is to send them in to the manufacturer to ensure they're in perfect working order.
Let's use these as an example. I purchased these from a member on this board. As the flow sheet shows there is a 42% variance between the highest flowing injector and the lowest. If I had taken it on good faith that they were in perfect working order, not only would I have had a set of injectors that were flowing below what I expected. I likely would've been very lean in one or two cylinders and destroyed my motor.
In my case, I'm unwilling to sell something that isn't a known and functioning commodity, so I had them flow tested, cleaned and serviced. Service cost through PTE is $15 per injector plus shipping both ways (about $25). Because the body of the injector sees no actual wear and because the internal components can so readily be replaced, once serviced, injectors will be functioning as new and can be used without a second thought.
I hope this helps to answer some questions.
Last edited by Tuxevo; May 18, 2013 at 05:51 AM. Reason: price drop
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Freddy302
Evo Engine / Turbo / Drivetrain
4
Jan 23, 2014 10:18 AM
Tuxevo
For Sale/WTB - Engine / Drivetrain / Power
4
Oct 20, 2013 10:05 AM
tiggeryellow1
For Sale/WTB - Engine / Drivetrain / Power
19
Sep 23, 2013 09:12 AM
rhyzin
Lancer Aftermarket Forced Induction Tech
26
Sep 22, 2012 04:29 PM