Notices
For Sale/WTB - Engine / Drivetrain / Power Includes exhausts, cams, clutches, flywheels and all other power related components.
Mark this thread as Unsold

FS: JB 84mm FP Red turbo

Thread Tools
 
Search this Thread
 
Old May 31, 2013 | 12:55 AM
  #1  
EvokidIX's Avatar
Thread Starter
Evolving Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (39)
 
Joined: Dec 2007
Posts: 132
Likes: 21
From: SoCal
FS: JB 84mm FP Red turbo

Selling a barley used FP Red turbo. The turbo was used for one track event before the rules changed for the year stating the car could not have anything bigger than a stock turbo.

I sent it out to Comp Turbo to have it checked out before I sell it. They said everything looks great!

The Turbo was ported by FP. Will come with the FP oil feed line kit, FP 25psi wastegate, and a Evo IX J-pipe

I will be shipping it in the original FP box so you won't have to worry about any damage

Here's a little info from FP

"NEW to the FP RED™ for the Evolution IX Line up is our own custom 84mm Flow Advancement Port™ compressor cover. You can now choose the new FP 84mm Flow Advancement Port™cover or stick with the standard 64mm Stock Appearing compressor cover as shown above. The larger inlet configuration helps reduce huffing and surging sounds that are often reported with these larger stock format hybrids when lugging the engine at low RPM and high boost pressure but perhaps even more useful is the way it helps feed the splitter blades of the compressor wheel resulting in increased flow. This larger inlet also increases the volume of the intake air pipe and reduces vacuum at the inlet of the turbo. Additionally the volute of the cover is now exactly tailored to the HTA wheel aero for the best performance possible.

The 84mm inlet Flow Advancement Port™ version can be used with our Intake Air Pipe which is located in the Related Products section at the bottom of the page. The intake is undercover black and designed to replace the stock intake air pipe perfectly allowing the use of the recirculated BOV and the valve cover crankcase vent as in the OEM application. A non-recirculated version is also now available. The 84mm Flow Advancement Port™ cover can also be used with standard 3" air intake pipes by utilizing a straight 3" coupler also located in the Related Products section at the bottom of this page"

The turbo's condition is 10/10

Asking $1700 shipped and PayPal

Located in Victorville, Ca 92394





Old May 31, 2013 | 08:25 AM
  #2  
EvokidIX's Avatar
Thread Starter
Evolving Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (39)
 
Joined: Dec 2007
Posts: 132
Likes: 21
From: SoCal
Bump
Old May 31, 2013 | 08:49 AM
  #3  
spoolinx's Avatar
Newbie
iTrader: (1)
 
Joined: Dec 2007
Posts: 86
Likes: 0
From: Twin Cities, MN
Where was this 2 days ago....arggg
Old May 31, 2013 | 03:37 PM
  #4  
mr2lover55's Avatar
Newbie
iTrader: (27)
 
Joined: Oct 2003
Posts: 78
Likes: 4
From: LA
Nice turbo man, didn't know you had this. Bump for this guy.
Old Jun 1, 2013 | 12:50 AM
  #5  
Street240sx's Avatar
Newbie
iTrader: (1)
 
Joined: Apr 2012
Posts: 24
Likes: 0
From: AZ
Wish I could get that turbo. I need something bigger than a fp71
Old Jun 1, 2013 | 10:21 AM
  #6  
EvokidIX's Avatar
Thread Starter
Evolving Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (39)
 
Joined: Dec 2007
Posts: 132
Likes: 21
From: SoCal
Thanks for bumping this up!

ttt
Old Jun 1, 2013 | 07:29 PM
  #7  
EvokidIX's Avatar
Thread Starter
Evolving Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (39)
 
Joined: Dec 2007
Posts: 132
Likes: 21
From: SoCal
Bump
Old Jun 3, 2013 | 10:34 AM
  #8  
lghtngyello03's Avatar
Evolving Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (44)
 
Joined: Feb 2008
Posts: 326
Likes: 1
From: Spartanburg, South Carolina
PM'd you.
Old Jun 3, 2013 | 11:10 AM
  #9  
EvokidIX's Avatar
Thread Starter
Evolving Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (39)
 
Joined: Dec 2007
Posts: 132
Likes: 21
From: SoCal
PM replied
Old Jun 5, 2013 | 07:52 AM
  #10  
GTABurnout's Avatar
Evolving Member
iTrader: (1)
 
Joined: Aug 2010
Posts: 268
Likes: 0
From: Tucson
Ignore my PM I didn't read the title clearly.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EvokidIX
For Sale - Part Outs
99
Nov 16, 2014 12:17 AM
EvokidIX
For Sale/WTB - Engine / Drivetrain / Power
32
Jul 25, 2013 10:01 AM
EvokidIX
For Sale - Engine / Drivetrain / Power
9
Jun 7, 2013 02:58 PM
EvokidIX
For Sale/WTB - Engine / Drivetrain / Power
13
Jun 5, 2013 10:11 PM
EvokidIX
For Sale/WTB - Engine / Drivetrain / Power
6
May 19, 2013 12:12 AM




All times are GMT -7. The time now is 10:57 AM.