Mark this thread as Unsold
OEM Flywheel, Cams, ETS, Energy Suspension, ACT
OEM Flywheel, Cams, ETS, Energy Suspension, ACT
I have a few items that have been collecting dust in my basement for a few years now and I need to free up some space.
Stock Evo 8 cams. They have approximately 50k miles on them. They are in very good shape with virtually no scaring on them. Worked perfect without issue until I upgraded them to 272's. $40 Shipped

The exact brand of this is unknown, as I bought this used. It was sold to me 4 years ago as an ETS V1 lower intercooler pipe. I ran it for two years and it worked flawlessly and fits fine. Not the prettiest thing, but held constant 25 psi with no issues. I upgraded to a Muse pipe that is a full 2.5 the entire way, so reason this has sat for a couple of years. The second picture shows there is minor denting where it hooks to the intercooler from tightening down the clamp. Does not come with any clamps. $40- Shipped


Brand new, still in the plastic ACT throwout bearing for a clutch. I used an OEM one when I put the clutch in and have no use for this. It goes for $70 new. Looking for $35 Shipped

I bought this OEM, resurfaced flywheel from TTP Engineering for $100 back when I did my transmission, but ended up re-using the ACT lightweight one that was already on there. Flywheel was put on crank, bolted down, and then removed after I changed my mind. The are ZERO miles on this since the resurface, just some very light surface rust from sitting, but nothing that will remotely effect the flywheel. SOLD
Brand new, Energy Suspension front sway bar, poly urethane bushings. These are the self-lubing, quiet ones. I bought a full whiteline front sway bar that came with bushings, so never used these. SOLD
Stock Evo 8 cams. They have approximately 50k miles on them. They are in very good shape with virtually no scaring on them. Worked perfect without issue until I upgraded them to 272's. $40 Shipped

The exact brand of this is unknown, as I bought this used. It was sold to me 4 years ago as an ETS V1 lower intercooler pipe. I ran it for two years and it worked flawlessly and fits fine. Not the prettiest thing, but held constant 25 psi with no issues. I upgraded to a Muse pipe that is a full 2.5 the entire way, so reason this has sat for a couple of years. The second picture shows there is minor denting where it hooks to the intercooler from tightening down the clamp. Does not come with any clamps. $40- Shipped


Brand new, still in the plastic ACT throwout bearing for a clutch. I used an OEM one when I put the clutch in and have no use for this. It goes for $70 new. Looking for $35 Shipped

I bought this OEM, resurfaced flywheel from TTP Engineering for $100 back when I did my transmission, but ended up re-using the ACT lightweight one that was already on there. Flywheel was put on crank, bolted down, and then removed after I changed my mind. The are ZERO miles on this since the resurface, just some very light surface rust from sitting, but nothing that will remotely effect the flywheel. SOLD
Brand new, Energy Suspension front sway bar, poly urethane bushings. These are the self-lubing, quiet ones. I bought a full whiteline front sway bar that came with bushings, so never used these. SOLD
Last edited by Eclipse4651; Feb 16, 2014 at 08:08 PM.
Price reductions, would really like to get some of this stuff out of my basement.
Flywheel- $60
LICP- $40
ACT throwout bearing- $35
OEM VIII Cams- $40
All prices still include shipping. Thanks for looking
Flywheel- $60
LICP- $40
ACT throwout bearing- $35
OEM VIII Cams- $40
All prices still include shipping. Thanks for looking
Trending Topics
The bushings are sold.
Thread
Thread Starter
Forum
Replies
Last Post



