Mark this thread as Sold
FS[Northeast]: Brand New Forced Performance Super94 Turbo
Thread Starter
Evolving Member
iTrader: (9)
Joined: Apr 2004
Posts: 150
Likes: 0
From: Bernville, PA
Brand New Forced Performance Super94 Turbo
For Sale:
Brand New In Box - Forced Performance HTAxx94, AKA "Super 94". $2,000 Shipped in the lower 48.
Comes in a .85 Open T3 with a 3" V band discharge. This is a brand new turbo, in the original box. Only ever removed from the box to take a picture. This turbo powered Devin Schultz's "Red Demon" to 8.4 @ 177. This is a serious turbo. If you're looking to make big power and haul some serious *** look no further. Save $550 over what you'd pay directly from FP!!!!!!!
Jon
Located in Reading, Pennsylvania.
From FP:
Compressor wheel - 94HTA
Flow rating - 90LB per minute
CW Measurements - 67.7MM Inducer / 94MM Exducer
TW Measurements - 76MM Inducer / 67MM Exducer
Compressor Housing - FP1S Compressor Cover 4" inlet 2.5" outlet
Turbine Housing - Standard FP .85 T3 TH
CHRA - 10MM T4 BB
Oil Line - Not Included
The above dyno graph shows back to back testing with the FP HTA™ Super 94 vs. FP HTA™ GT3794R as you can see there was minimal increase in lag and a gain of 58WHP.
The new FP HTA™ Super 94 shares a lot of similarities with our existing FP HTA™ GT3794R but utilizes a larger frame ball bearing CHRA with 10MM bearings instead of 8MM like in the 35R. It incorporates an all new larger 76MM turbine wheel in our T3 .85 A/R turbine housing so that you can keep your existing manifold. The compressor wheel remains unchanged but finds a new home in our new larger T4S cover. So it's like an FP HTA™ GT3794R hit the gym over the winter and has come back packing a bit more punch.
This turbo has powered the Boostin Performance Red Demon car to an 8.4@177MPH quarter mile pass.
Brand New In Box - Forced Performance HTAxx94, AKA "Super 94". $2,000 Shipped in the lower 48.
Comes in a .85 Open T3 with a 3" V band discharge. This is a brand new turbo, in the original box. Only ever removed from the box to take a picture. This turbo powered Devin Schultz's "Red Demon" to 8.4 @ 177. This is a serious turbo. If you're looking to make big power and haul some serious *** look no further. Save $550 over what you'd pay directly from FP!!!!!!!
Jon
Located in Reading, Pennsylvania.
From FP:
Compressor wheel - 94HTA
Flow rating - 90LB per minute
CW Measurements - 67.7MM Inducer / 94MM Exducer
TW Measurements - 76MM Inducer / 67MM Exducer
Compressor Housing - FP1S Compressor Cover 4" inlet 2.5" outlet
Turbine Housing - Standard FP .85 T3 TH
CHRA - 10MM T4 BB
Oil Line - Not Included
The above dyno graph shows back to back testing with the FP HTA™ Super 94 vs. FP HTA™ GT3794R as you can see there was minimal increase in lag and a gain of 58WHP.
The new FP HTA™ Super 94 shares a lot of similarities with our existing FP HTA™ GT3794R but utilizes a larger frame ball bearing CHRA with 10MM bearings instead of 8MM like in the 35R. It incorporates an all new larger 76MM turbine wheel in our T3 .85 A/R turbine housing so that you can keep your existing manifold. The compressor wheel remains unchanged but finds a new home in our new larger T4S cover. So it's like an FP HTA™ GT3794R hit the gym over the winter and has come back packing a bit more punch.
This turbo has powered the Boostin Performance Red Demon car to an 8.4@177MPH quarter mile pass.
Thread
Thread Starter
Forum
Replies
Last Post
Anubis18
For Sale/WTB - Engine / Drivetrain / Power
20
Oct 12, 2015 06:53 AM
WTB[SouthEast]: FP super94
Boostin_hard
For Sale/WTB - Engine / Drivetrain / Power
0
Jul 24, 2015 01:29 PM