Mark this thread as Unsold
[FS] AGP 3.5 Intercooler + AGP LICP (Evo 8&9)
AGP 3.5 Intercooler + AGP LICP (Evo 8&9)
Would like to keep this as a package sale only for now.
Both items have less than 15k miles of drive time on them.
AGP 3.5" Intercooler (24*12*3.5) bar and plate core. 2.5 standard pipe fitment.
*Polished cast end tanks
*Includes silicone hoses
*Typically AGP includes worm claps to keep costs down, but I upgraded them all to t-bolt clamps instead.
*Great Condition, no damage that I can find or scrapping/significant bends on the bottom like I see most used IC's have. No excess oil built up either. No leaks. Slightly dirty on the front due to our spring melt/break up seasons up here in AK.
AGP 2.5" polished aluminum lower intercooler pipe
*Piping is full 2.5 and tappers at the coupler
*As mentioned before, typically comes with worm clamps, but upgraded them to t-bolts.
*Good condition. Slight ding/bend on the pipe (that if i recall was made for dump tube fitment) but zero leaks. Works 100%.
If you're not familiar with the AGP brand, head on over to the EvoX section as they're much more known for that application. Comparable to all well known 3.5 IC's on the market. Made 400+ whp on a mustang dyno w/ stock turbo on this IC and had no problems.
No trimming needed with this setup. Will clear factory beam without any problems
Brand new you're looking at retail $694.00 + shipping for the entire setup.
Asking $380.00 for the package.
*PayPal Fee Included within listed price
*Shipping to anywhere in the United States is included within the listed price.
*Will not sell outside of USA
*Residential or Business address only.
Have any questions? Please PM me.

More pictures:
https://i.imgur.com/KCkQuSZ.jpg
https://i.imgur.com/jY0sMMm.jpg
https://i.imgur.com/CBPkigX.jpg
https://i.imgur.com/amOsX0O.jpg

More pictures:
https://i.imgur.com/OTbIL8K.jpg
https://i.imgur.com/vTp7Dki.jpg
https://i.imgur.com/9LBkIXZ.jpg
Both items have less than 15k miles of drive time on them.
AGP 3.5" Intercooler (24*12*3.5) bar and plate core. 2.5 standard pipe fitment.
*Polished cast end tanks
*Includes silicone hoses
*Typically AGP includes worm claps to keep costs down, but I upgraded them all to t-bolt clamps instead.
*Great Condition, no damage that I can find or scrapping/significant bends on the bottom like I see most used IC's have. No excess oil built up either. No leaks. Slightly dirty on the front due to our spring melt/break up seasons up here in AK.
AGP 2.5" polished aluminum lower intercooler pipe
*Piping is full 2.5 and tappers at the coupler
*As mentioned before, typically comes with worm clamps, but upgraded them to t-bolts.
*Good condition. Slight ding/bend on the pipe (that if i recall was made for dump tube fitment) but zero leaks. Works 100%.
If you're not familiar with the AGP brand, head on over to the EvoX section as they're much more known for that application. Comparable to all well known 3.5 IC's on the market. Made 400+ whp on a mustang dyno w/ stock turbo on this IC and had no problems.
No trimming needed with this setup. Will clear factory beam without any problems
Brand new you're looking at retail $694.00 + shipping for the entire setup.
Asking $380.00 for the package.
*PayPal Fee Included within listed price

*Shipping to anywhere in the United States is included within the listed price.

*Will not sell outside of USA

*Residential or Business address only.
Have any questions? Please PM me.

More pictures:
https://i.imgur.com/KCkQuSZ.jpg
https://i.imgur.com/jY0sMMm.jpg
https://i.imgur.com/CBPkigX.jpg
https://i.imgur.com/amOsX0O.jpg

More pictures:
https://i.imgur.com/OTbIL8K.jpg
https://i.imgur.com/vTp7Dki.jpg
https://i.imgur.com/9LBkIXZ.jpg
Last edited by EvolvedAK; Oct 7, 2014 at 06:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
tico915007
For Sale - Engine / Drivetrain / Power
8
Aug 7, 2011 12:36 PM
vigilante.zen
For Sale/WTB - Engine / Drivetrain / Power
40
Aug 27, 2010 08:01 AM
recompile
Evo Engine / Turbo / Drivetrain
42
Jan 14, 2008 12:55 PM




