Mark this thread as Unsold
[FS] Used id1300 pnp
#1
Used id1300 pnp
These came out of my car last month after running some pump gas thru them. Then I ran them thru a cleaning machine. I made around 500-530whp @8000 with them on the Red from 28-30psi on E85 with a 450@14 volts. I chose them because they were designed by Bosch for Injector dynamics. They aren't just a Bosch injector with a modified/hacked head. This is the largest injector that will drive the best on pump gas or E85. It has all Stainless internals They worked really well on the stock ecu and the Infinity/standalone. Crisp throttle response/tight trims and my car got 20-25mpg on E85 with mixed driving.Trims were 2-3% for me
If you only need to support around 600hp@8000 then these will work really well. The few times I needed more power I ran C16 thru them to extend my fuel system to over 600whp.
Now I've got ID1700 since I like having 600+ all the time.
580.00 shipped in the lower 48. I got a good deal on these new so I'd like to pass it on.
Here is a little bit about them and how they are made.
http://injectordynamics.com/injectors/id1300/
scaling gas 1125
scaling E85 731
Latency
4.69 3.816
7.03 2.376
9.38 1.584
11.72 1.152
14.06 .888
16.41 .696
18.68 .552
If you only need to support around 600hp@8000 then these will work really well. The few times I needed more power I ran C16 thru them to extend my fuel system to over 600whp.
Now I've got ID1700 since I like having 600+ all the time.
580.00 shipped in the lower 48. I got a good deal on these new so I'd like to pass it on.
Here is a little bit about them and how they are made.
http://injectordynamics.com/injectors/id1300/
scaling gas 1125
scaling E85 731
Latency
4.69 3.816
7.03 2.376
9.38 1.584
11.72 1.152
14.06 .888
16.41 .696
18.68 .552
Last edited by Abacus; Jun 20, 2016 at 04:21 PM.
Thread
Thread Starter
Forum
Replies
Last Post
roni4g63
For Sale/WTB - Engine / Drivetrain / Power
1
Feb 5, 2017 10:54 PM