Mark this thread as Unsold
FS[SouthEast]: AMS 2.0 built crate motor (Miami,FL)
AMS 2.0 built crate motor (Miami,FL)
Hi guys,
have this AMS crate motor for sale. Bought from AMS.
Retail price from AMS was $15,999.95
Work carried out by AMS:
Balanced and blueprinted with precise, documented assembly
Camshafts degreed for maximum performance
Precision AMS spec machine work on block and cylinder head
Manley Pistons
O-ringed block deck for improved head gasket seal
AMS CNC Cylinder Head, the best 4G63 head available
AMS/TMS Head Studs, the strongest available
AMS Race Balance Shaft Eliminator for added oil pump reliability
ARP Main Studs for peace of mind at high RPM
Power Enterprises Timing Belt for added strength
AMS Wet Sump Oil Pan prevents oil starvation and adds oil capacity
Comes fully assembled, ready for installation
Includes:
Manley pistons
Manley turbo tuff I-Beam rods
ARP main stud kit
AMS race balance shaft eliminator kit
High performance rod & main bearings
Oil pump & sprocket
Crank sprocket & trigger plate
Oil filter housing
Rear main seal and housing
Water pump
O-ringed block deck
AMS CNC cylinder head
Lifters & rocker arms
Metal head gasket
AMS/TMS head studs
Adjustable cam gears
Power Enterprises timing belt
Timing belt tensioner and all other timing components
Valve cover
Front engine mount bracket
All necessary gaskets
Displacement: 2.0 liters
Stroke: 88mm
Compression Ratio: 9:5:1
Crankshaft: Manley
only thing done to it was that we swapped out their oil pan for the stock one as there was no need for the bigger oil pan they provide.
Less than 5k miles on this long block and it is in PERFECT working order.
Everything from oil pan to valve cover included.
Item located in Miami, FL.
$5300 shipped within the US.
Pictures to be included tomorrow.
have this AMS crate motor for sale. Bought from AMS.
Retail price from AMS was $15,999.95
Work carried out by AMS:
Balanced and blueprinted with precise, documented assembly
Camshafts degreed for maximum performance
Precision AMS spec machine work on block and cylinder head
Manley Pistons
O-ringed block deck for improved head gasket seal
AMS CNC Cylinder Head, the best 4G63 head available
AMS/TMS Head Studs, the strongest available
AMS Race Balance Shaft Eliminator for added oil pump reliability
ARP Main Studs for peace of mind at high RPM
Power Enterprises Timing Belt for added strength
AMS Wet Sump Oil Pan prevents oil starvation and adds oil capacity
Comes fully assembled, ready for installation
Includes:
Manley pistons
Manley turbo tuff I-Beam rods
ARP main stud kit
AMS race balance shaft eliminator kit
High performance rod & main bearings
Oil pump & sprocket
Crank sprocket & trigger plate
Oil filter housing
Rear main seal and housing
Water pump
O-ringed block deck
AMS CNC cylinder head
Lifters & rocker arms
Metal head gasket
AMS/TMS head studs
Adjustable cam gears
Power Enterprises timing belt
Timing belt tensioner and all other timing components
Valve cover
Front engine mount bracket
All necessary gaskets
Displacement: 2.0 liters
Stroke: 88mm
Compression Ratio: 9:5:1
Crankshaft: Manley
only thing done to it was that we swapped out their oil pan for the stock one as there was no need for the bigger oil pan they provide.
Less than 5k miles on this long block and it is in PERFECT working order.
Everything from oil pan to valve cover included.
Item located in Miami, FL.
$5300 shipped within the US.
Pictures to be included tomorrow.
Last edited by 11secEVO7; Dec 6, 2016 at 07:59 AM. Reason: spec edited
I think you got some numbers very very mixed up:
AMS 2.0 short block is $6999
Even the amazing 2.3 RR is $9999
https://www.horsepowerfreaks.com/-p-...L94hoCryvw_wcB
If you commissioned it yourself, it would be impossible to make a mistake of 2.5X...the original price.
Check facts
AMS 2.0 short block is $6999
Even the amazing 2.3 RR is $9999
https://www.horsepowerfreaks.com/-p-...L94hoCryvw_wcB
If you commissioned it yourself, it would be impossible to make a mistake of 2.5X...the original price.
Check facts
OP:
FS posts on EVOM MUST INCLUDE:
PICTURE OF THE ITEM WITH A SIGN CONTAINING THE DATE AND YOUR EVOM USERNAME.
Price
Accurate description of item and its current condition.
Location of seller & Willingness to ship.
If applicable VIN number - Transmissions, Shortblocks, body parts which have VIN numbers on them. A picture of your username/date next to the visible VIN number is required. VIN should also be in the FS post in plain text.
Trending Topics
make an offer...you may be surprised!
for all the guys asking about compression test. I don't have a current one. But the motor came out of my car working. The only reason it came out was to bring my car back to stock.
I at no time had any reason to suspect any faults.
I had the 2.3RR motor before, sold that and got this 2.0 crate motor, and then went back to stock and sold the car.
for all the guys asking about compression test. I don't have a current one. But the motor came out of my car working. The only reason it came out was to bring my car back to stock.
I at no time had any reason to suspect any faults.
I had the 2.3RR motor before, sold that and got this 2.0 crate motor, and then went back to stock and sold the car.